![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 61 to 75 of 98
-
6th March 2007, 03:34 PM #61
OK, it looks like rubbish.
Is that what you meant?
-
6th March 2007, 03:35 PM #62
I find the tablesaw is definitely the most versatile machine!
What about cove cutting? I can't live without a tablesaw, (rebates, grooves, dadoes, anything that's not stopped, then its a router), and mostly use the bandsaw for curved cuts and a bit of resawing. Large sheets now go into the sliding tablesaw, but before that I'd use a handsaw even, as I have a particular aversion to handheld circular saws!
Cheers,Andy Mac
Change is inevitable, growth is optional.
-
6th March 2007, 03:40 PM #63I find the tablesaw is definitely the most versatile machine!
Limited!! Pffft
-
6th March 2007, 03:43 PM #64
The Jessica of the tablesaw world.....
The only way to get rid of a [Domino] temptation is to yield to it. Oscar Wilde
.....so go4it people!
-
6th March 2007, 03:45 PM #65
Where does he get all those girls from, anyway?
-
6th March 2007, 04:08 PM #66
Sorry to interrupt, sort of off topic as well but when I'm trying to rip a length of board on the table saw... well OK the Triton pretend TS I find that the board wants to drift away from the fence towards the blade.
Am I doing something fundamentally wrong or is it a common occurrence?
How do you correct this?
-
6th March 2007, 04:11 PM #67Am I doing something fundamentally wrong or is it a common occurrence?
Either your fence is out of alignment, or the saw is. Check the saw first. I used to set my fence to 0 and then make sure the blade was touching it at both ends.
Do a search!!!
-
6th March 2007, 04:12 PM #68
-
6th March 2007, 04:20 PM #69
BT
This is how you fix the problem.
1.Put the fence right against the saw blade
2.Record the reading on both arms. One reads 0cm and the other reads 0.5cm
3.Make a note on the table top to remind you to take 0.5cm off one side of the fence every time you rip something.
Visit my website at www.myFineWoodWork.com
-
6th March 2007, 04:20 PM #70
Thanks, I have enough to do tuning up the cars, now I have to worry about saws and planes! Lucky I don't have a piano.
-
6th March 2007, 04:38 PM #71
-
6th March 2007, 04:56 PM #72
-
6th March 2007, 05:03 PM #73
-
6th March 2007, 05:32 PM #74
-
6th March 2007, 11:29 PM #75
Setting up the SRK for milling UHMW plastic.
http://www.youtube.com/watch?v=7nzR5mEi7U8
Milling slots on UHMW plastic
http://www.youtube.com/watch?v=MZr4w-dM-hc
Tapered cuts on narrow pieces and matching tapered dados.
http://www.youtube.com/watch?v=GBGzoQGfUNg
The Bridge close up
http://www.youtube.com/watch?v=SKmIxFNhIN8
Cutting UHMW strips with the Bridge
http://www.youtube.com/watch?v=3I4bg...elated&search=
Gang cutting (cross cuts) UHMW strips with The Bridge.
http://www.youtube.com/watch?v=VmoUx...e=user&search=
__________________I know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones.
Albert Einstein