Thanks: 69
Likes: 815
Needs Pictures: 0
Picture(s) thanks: 0
Results 61 to 75 of 1571
Thread: Your latest project
-
9th November 2010, 03:21 PM #61GOLD MEMBER
- Join Date
- Jul 2006
- Location
- Adelaide
- Posts
- 2,661
great looking Kart Gavin
100 you say...your backside should be smokin
-
9th November 2010, 03:24 PM #62Distracted Member
- Join Date
- May 2010
- Location
- Lower Lakes SA
- Age
- 59
- Posts
- 2,556
Very, very impressive Gavin. 70 hours? I would have spent 700 and still be fussing about!
-
9th November 2010, 03:24 PM #63
Extreme pucker factor in the bottom end sometimes, around 100 mph / 160 kph at Mallala and faster at the longer tracks like Eastern Creek & Phillip Island, all from 125cc.
In the wet it's the same speed but with no visibility or grip.
-
9th November 2010, 03:50 PM #64Dave J Guest
Eskimo, now just print it out and compare the 2 in the mill. LOL
Seriously though, You could just mill the other side out plug the old holes and give it coat of paint, no one would ever tell.
Gavin
Nice work and looks like great fun Gavin.
I have a race kart frame with wheels etc, here we picked up for $250. We plan to put a RM125 water cooled motor in it for the paddock. We have the wet weather tyres to put on it so we hope to get enough grip in the dirt, but it's just for fun and the son will be wanting to drift it etc.
The local Kart track is 3 minutes away at West Wallsend, I don't think they have your size karts on them. I know they upgraded it a few years ago so I am not sure now.
Dave
-
9th November 2010, 04:29 PM #65GOLD MEMBER
- Join Date
- Jul 2010
- Location
- Melbourne
- Posts
- 7,770
Glad you bought it up and not me Dave, But if eskimo has a mill(is it for a mill or a lathe?) just run it backwards(which in this case will be forwards) if it has a backwards. If you have a camloc lathe you could run it backwards in that as well.
Did I confuse everyone?
Stuart
-
9th November 2010, 04:34 PM #66GOLD MEMBER
- Join Date
- Jul 2006
- Location
- Adelaide
- Posts
- 2,661
-
9th November 2010, 05:51 PM #67Dave J Guest
Looking at it again, Stuart is right there and you will have to run it backwards, even if you do change the grub screws to the other side. The tool should have been on the other side of centre to run in the standard forward rotation of a mill.
It might still work, but you might have to change your grinding angle to suit. I think you would be better off running it backwards which wouldn't hurt anything.
I forget what it was a few months ago, I made something that took hours and found I made it the opposite way around and ended up having to bin it, so your no alone in your mistakes Eskimo.
Stuart
He has the same mill as me only it's a different brand. They come with reverse as standard so he should be right if he wants to go that way.
Dave
-
9th November 2010, 06:14 PM #68GOLD MEMBER
- Join Date
- Jul 2006
- Location
- Adelaide
- Posts
- 2,661
Phew......at least it wasnt a complete waste of time
"read the drawing correctly next time wally"
-
9th November 2010, 06:43 PM #69Dave J Guest
Now you have it worked out, time to give it a go and post up you results.
Fly cutters leave a beautiful finish on almost anything, especially aluminum.
If you do any long cuts in steel, you will find a bit of coolant sprayed on to it to keep it cool will make the edge last longer. Other wise from one end to the other it will cut shallower as it wears and the surface will be uneven.
Dave
-
10th November 2010, 07:09 AM #70GOLD MEMBER
- Join Date
- Jul 2006
- Location
- Adelaide
- Posts
- 2,661
me grind the HSS?......for my left handed reverse cutting anticlockwise fly cutter...ok I 'll give it a go......
-
10th November 2010, 01:07 PM #71Dave J Guest
Just follow that link I gave you, he describes how to do it step by step.
Dave
-
14th November 2010, 04:55 PM #72GOLD MEMBER
- Join Date
- Jul 2006
- Location
- Adelaide
- Posts
- 2,661
MkII was a failure
I need a caculator in the shed....and the beer fridge kept locked while working..err playing around (so she calls it)
-
14th November 2010, 05:09 PM #73Dave J Guest
If the weather down their is anything like it is here today,
No wonder you messed it up, rushing to have a beer and cool off. LOL
Don't worry we all scrap parts.
Did you try to grind a tool for the one you already made?
Dave
-
15th November 2010, 07:13 AM #74GOLD MEMBER
- Join Date
- Jul 2006
- Location
- Adelaide
- Posts
- 2,661
not yet....
I'm too chicken......
-
17th November 2010, 01:32 PM #75GOLD MEMBER
- Join Date
- Jul 2010
- Location
- Melbourne
- Posts
- 7,770
To much time on your hands?
To many tools?
More than a little anal about damaging the spindle taper?
Build yourself one of these..... hey it is a woodwork forum
When fitting my 4 jaw I always hated trying to get the camlock pins lined up without bashing the spindle taper.
I will turn a bit more of a taper onto the ends of the pins to help it line up easier as they droop a little sometimes.
Stuart
Similar Threads
-
Help with latest project
By woodcutta in forum THE GARDEN SHEDReplies: 6Last Post: 17th February 2008, 05:30 PM