Pin holes/bubbles in NC lacquer

[John Samuel]

I was using some Solarez today. I was filling/flooding some cracks. Put the timber in the sun to cure which is instant and I put a finger on the curing solarez to fine it gets extremely HOT whilst curing.

Rod,

Are you getting the desired results with Solarez?

[rod1949]

Rod,

Are you getting the desired results with Solarez?

Yes I am John. Given its fluidness (compared resin) and instant drying filling the voids is very quick. A downside is, as I'm doing spot fills and not over the whole timber, I get spot stains that darkens the timber and thus this shows in the finish.

[John Samuel]

Just finished a bedside table in NGR.

Used two coats of Solarez to seal the top.

Works like magic. No bubbles or pinholes.

Solarez is great at eliminating pin holes and bubbles. It is also a first class grain filler. It will be a permanent feature in my workshop.