Thanks: 22
Likes: 112
Needs Pictures: 1
Picture(s) thanks: 6
Results 451 to 460 of 460
-
10th April 2018, 11:15 PM #451
The blades were super sharp with the starting & sawing smooth & easy through Tassie Oak.
The cut was very clean. I've not used the blade yet in it's flexed position but suspect from the write up on the website it'll be as easy as the straight cut.
I'll be using the small saws to cut small parts for the toymaking so not a hard life so expect this purchase will last a very long time.
OH and for one of the saws, I think I saw that I can order replacement or different blades.
That's my brief summary Barry and hop it helps you [and others] with your decision making purchase.
Cheers, crowie
https://protooling.com.au/collections/folding-pull-saws
-
13th April 2018, 09:10 PM #452GOLD MEMBER
- Join Date
- Jan 2013
- Location
- Tasmaniac
- Posts
- 882
I am no longer seething with jealousy as my 4 saws turned up in the post today. Felt like a kid at christmas time.
Took the flush cut one out of the packet and nearly cut myself it is so sharp, can't wait to carve the lamb roast with it a bit later on tonight.
DSCF6830.jpg Might even try to dovetail the lamb to a parsnip with the dovetail saw.
-
13th April 2018, 09:24 PM #453
-
13th April 2018, 09:30 PM #454GOLD MEMBER
- Join Date
- Jan 2013
- Location
- Tasmaniac
- Posts
- 882
Yeah well, maybe "beef,wood, would" be a better match.
-
13th April 2018, 09:34 PM #455
-
13th April 2018, 09:54 PM #456
-
13th April 2018, 11:08 PM #457GOLD MEMBER
- Join Date
- Jan 2013
- Location
- Tasmaniac
- Posts
- 882
-
14th April 2018, 12:29 PM #458
-
14th April 2018, 02:43 PM #459GOLD MEMBER
- Join Date
- May 2012
- Location
- Melb
- Posts
- 1,502
Bugger!
I couldn't take it anymore and bought the compact and professional sets. Now to wait impatiently for them to arrive.
So here's a question, I'd never heard of that company before this competition, so how many people ended up buying off them after seeing them on this forum?
I also had to tear myself away from the little block plane they have, very nice looking it was!
cheers, Ian
-
16th April 2018, 07:08 PM #460GOLD MEMBER
- Join Date
- Jan 2013
- Location
- Tasmaniac
- Posts
- 882
Had a go with the dovetail saw today.
It cuts really nice, however must admit I'm a bit out of practice and will need to brush up a bit to get the "end join dovetail" spot on.
DSCF6835.jpg