Results 31 to 45 of 71
Thread: Where do I start - Kitchen Reno
-
25th October 2020, 11:20 AM #31
From the Bunnies website:
- More sizes and colours available through Special Orders
- Contemporary high gloss finish
- Scratch resistant and repairable
- Custom colours available
A Bellessi Splashback is the new way to add colour, functionality and durability to your home. It is perfect for use in kitchens, bathrooms and laundries or virtually on any vertical surface. Bellessi adds colour for life! It's lightweight, cost effective, easy to cut to size and install on site. Bellessi is an Australian made modified polymer panel with an extremely high gloss finish. Bellessi will transform your kitchen, bathroom or living areas into a vibrant modern environment. It is 50% lighter and 25 times more impact resistant than glass.
I couldn't agree more Beardy, that's why the splashback, whatever material we (I mean SWMBO) choose, will be the last thing done on the reno.To grow old is inevitable.... To grow up is optional
Confidence, the feeling you have before you fully understand the situation.
What could possibly go wrong.
- More sizes and colours available through Special Orders
-
25th October 2020, 11:46 AM #32
John
Your kitchen has some very strong horizontal lines, emphasised by the coloured horizontal stripe.
Me. I'd try for two rows of tiles below the stripe and one above -- but that infers you can get glazed tiles of the required size.
I wouldn't use polished stone as it's, IMO, too hard to keep clean. SWMBO is forever spraying the stone bench tops here with a surface cleaner.
IMO, the stripe really lifts the look of your original kitchen.regards from Alberta, Canada
ian
-
25th October 2020, 02:48 PM #33GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 95
We've got acrylic (not fitted by me - here when we turned up). It's great. I don't think I'd go back to tiles given the choice. Looks good, easy to clean, and it's hard wearing (no scratches on ours)
IMG_1425.jpg
Carries on around the other side of the window and stops the coffee machine splattering the walls, but you get the idea
-
26th October 2020, 06:02 PM #34
Day 3.
Old kitchen all gone and ready to start installing the new kitchen tomorrow.
Found out today that because I have a gas cooktop only glass or tiles are permitted for use as splashback material.
Kitchen Project 27.jpg
Kitchen Project 28.jpg
Wiring has been rerouted through the studs, much better.
Kitchen Project 29.jpgTo grow old is inevitable.... To grow up is optional
Confidence, the feeling you have before you fully understand the situation.
What could possibly go wrong.
-
26th October 2020, 06:12 PM #35
Interesting to see you have a gas cooktop, I have been told that you can't use acrylic splashbacks behind a gas cooktop.
Splashbacks and gas
Most installation requirements relating to splashbacks have to do with gas. When you consider that many splashbacks will be built behind ovens and other cooking implements, this is an important factor so you don’t burst a gas pipe or blow yourself up.
Combustible splashbacks installed behind open-flame gas cooktops are carefully regulated in order to prevent them from catching or spreading fire. These regulations are specifically contained within the requiremens for the installation of gas appliances. Combustible materials generally include things like acrylic splashbacks, timber splashbacks and similarly susceptible materials. Many builders and designers believe (understandably) that glass and stainless steel are non-combustible materials; however both conduct heat fairly well, and if they're too close to a gas burner they can easily transfer heat to the unprotected substrate material or timber framing behind them - which as you can imagine may easily end in disaster. A clearance between the nearest gas burner to any combustible splashback of 200mm or more means the installation will be fine. Any less than 200mm and you will need your builder to do a little bit of work to make it safe. If you have a stainless steel or glass splashback, you'll need to install a fire resistant board up to the same distance (200mm from the nearest gas burner) behind the glass or stainless steel splashback that complies with the requirements of AS 5601/AG 601 Gas Installations, Appendix C substrate. There are exceptions to this rule - if clear documentation can be supplied that demonstrates that the fixing method will ensure that the temperature of the combustible surface won't exceed 65º Celsius above ambient temperature during normal operation, then a fire resistant board isn't necessary.To grow old is inevitable.... To grow up is optional
Confidence, the feeling you have before you fully understand the situation.
What could possibly go wrong.
-
27th October 2020, 01:27 AM #36
-
27th October 2020, 01:37 AM #37
two, possibly three, potential "gotcha" issues I can see.
1. does the new cabinetry exactly match the colour of the pelmet you have left in the ceiling? Me thinks it's unlikely.
2. do the new overhead cupboards exactly meet with the pelmet? IMO this is critical to the amount of work required on the ceiling.
3. when do you intend repairing / re-sheeting the walls. Kitchens I've seen installed were into spaces where the walls were fully intact. Fixing the walls will require disconnecting the power to the ensuite.regards from Alberta, Canada
ian
-
27th October 2020, 01:49 AM #38
Another thought for this stage: Do you want more, relocated or different lumieres or electrical outlets? Under cabinet lights?
Innovations are those useful things that, by dint of chance, manage to survive the stupidity and destructive tendencies inherent in human nature.
-
27th October 2020, 06:52 AM #39GOLD MEMBER
- Join Date
- Jul 2011
- Location
- In between houses
- Posts
- 185
One thing I always do at this stage John is replace all the plasterboard, do all the patching, it’s easier now rather than bending over the cabinets. And go around afterwards and seal up everywhere with no more gaps. This gives the cockroaches and other critters less places to come through the walls and in under and inside the cabinets. Pay particular attention to holes through the bottom plate, where wires or gas lines come through, this is a common spot for pest egress.
-
27th October 2020, 07:05 AM #40GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 95
-
27th October 2020, 08:30 AM #41
1. & 2. The pelmet and cornice work is going to be replaced.
3. Not sure what you mean by having to disconnect power to the ensuite. The power will be isolated at the mains while electrical work is being carried out.
There are sufficient power outlets already installed. Lighting is all good.
I was going to plaster the walls after the cabinets were installed, but you have given me food for thought. I'll reassess my plan of attack after the kitchen arrives this morning.To grow old is inevitable.... To grow up is optional
Confidence, the feeling you have before you fully understand the situation.
What could possibly go wrong.
-
27th October 2020, 08:57 AM #42
Thank you all for the input so far, it has been greatly appreciated.
In past kitchen reno's I have always struggled with connecting the sink to the waste pipe. For some reason there never seems to be exactly the right combo of PVC fittings available. This time I think that I will purchase the fittings and locate the sink to suit. I can always buy a couple of different combo's and return what I don't use.
I believe that I will have to cut off the waste pipe below the sleeve to facilitate fitting the cupboard, then fit another sleeve and extend the waste pipe again.
Kitchen Project 30.jpgTo grow old is inevitable.... To grow up is optional
Confidence, the feeling you have before you fully understand the situation.
What could possibly go wrong.
-
27th October 2020, 08:57 AM #43
-
27th October 2020, 10:33 AM #44
Call me paranoid/over cautious, but I just spent a small fortune getting other dodgy wiring that was done by the previous owner fixed. If we were ever to have a fire in the house the insurance company would use any non compliant issues to reject a claim, I don't want to give them any ammo.
To grow old is inevitable.... To grow up is optional
Confidence, the feeling you have before you fully understand the situation.
What could possibly go wrong.
-
27th October 2020, 11:08 AM #45GOLD MEMBER
- Join Date
- Jul 2011
- Location
- In between houses
- Posts
- 185
I fail to see how closing pest entry points will give your insurance company any reason to reject a claim. If anything it’s lessening the likelihood of rodents getting in and chewing the cables, a major cause of electrical problems and cause of fires. Do what you like.
Similar Threads
-
Kitchen Reno
By Reno RSS Feed in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 0Last Post: 18th January 2014, 03:20 PM -
Bathroom and kitchen reno
By Toyboy in forum KITCHENSReplies: 6Last Post: 8th February 2008, 11:45 PM -
Kitchen Reno
By vGolfer in forum KITCHENSReplies: 13Last Post: 22nd June 2005, 10:10 AM
Bookmarks