Thanks: 7
Likes: 19
Needs Pictures: 0
Picture(s) thanks: 0
Results 31 to 45 of 53
-
29th November 2015, 08:04 PM #31SENIOR MEMBER
- Join Date
- Nov 2011
- Location
- Newcastle NSW
- Posts
- 755
Matt,
Ah so you didn't get an angle grinder with a sanding disc attached, like Jack was suggesting.
Firstly well done on your aquasition, those 30" discs are monsters!! Secondly, thank you so much for thinking about me, and what I was seeking, unfortunately I had to make some decisions and one of them was to trade off the JTA (I just couldn't justify the real estate or the need for such a large disc). Henry, who as you know is a retired pattern maker, swapped me his early JY bobbin sander and a spare table with dust extraction port for the JTA (a good swap for both of us I think, and the machine I was seeking in the first place, so I got there in the end). I also now have an Australian made L.S. Barker double disc 18" sander.
I've just jumped over to the Canadian site and seen you have posted about the JTA, looks very complete.
Cheers,
Camo
P.S. Vann, that's a bit extreme...lol.
-
2nd December 2015, 09:38 AM #32
Hello Groovers, I have recently acquired a Harrison L5a metal lathe. The lathe is missing the gap infill piece for the bed. Anyone got a spare?
Regards Damien.I'm a dancing fool! The beat goes on and I'm so wrong!!!!
-
8th December 2015, 04:10 PM #33
I picked up this mitre gauge on Sunday, if anyone needs it send me a PM.
Its European I guess. The thread on the length rod is 12mm.
I have also finally fixed the rust problem on my 12 inch Bursgreen thickly be turning up some stainless in and out feed rollers.
The originals are up for grabs if you need a pair.
H.Jimcracks for the rich and/or wealthy. (aka GKB '88)
-
8th December 2015, 05:36 PM #34China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 3,150
Looking for the rise and fall worm drive and shaft for a Durden SP 10/600, or some one has a machine in parts so I can take the specs ( SA only)
-
6th January 2016, 01:01 PM #35Senior Member
- Join Date
- Nov 2012
- Location
- Sydney
- Posts
- 246
I'm looking for an original 12" (300mm) and 6" (150mm) cast iron toolrest for a Hyco/Woodfast lathe with 3/4" (19mm) shaft.....just seen that Woodfast have discontinued these
I have one of the original fabricated bent steel 12" rests, and its....well... bent (must have been one hell of a catch).
Hope someone can assist
Thanks and regards,
John
-
19th February 2016, 11:00 AM #36Senior Member
- Join Date
- Nov 2012
- Location
- Sydney
- Posts
- 246
Woodfast/Hyco tool rests found....thanks again Henry !!
Regards,
John
-
10th March 2016, 10:09 AM #37
-
28th March 2016, 10:46 PM #38Senior Member
- Join Date
- Aug 2008
- Location
- Pimpama
- Age
- 54
- Posts
- 101
Not sure if this is the right thread, but I have picked up a Wadkin 12AGS table saw (photo attached).
I am looking for a riving knife bracket which is one of the castings on the outside of the blade. The riving knife attaches to this casting. It looks like the top of the casting has been broken off on mine. I don't have the piece that has broken off to weld back on. This is a decent sized casting, so I think I would only be able to find one from a saw that is otherwise unusable or damaged. I have tried a place in the UK, but I am expecting a nasty price shock !
If I can locate the riving knife and blade guard I would be able to start using the saw.
I can supply a pdf of the manual if anybody needs clarification of the part I am talking about.
IMG_1444_small.JPG
-
11th May 2016, 02:46 PM #39
JTA mitre.
Clearing up in the shed and this surfaced.
Free to a good home.
HJimcracks for the rich and/or wealthy. (aka GKB '88)
-
17th May 2016, 05:47 PM #40New Member
- Join Date
- Jul 2015
- Location
- Eaton WA
- Posts
- 5
Hi Great Idea, I am looking for a set of rollers for a Dewalt DW 1150 Planer Thicknesser I bought one and forgot to check out the rollers? Although i live in Western Australia I will consider freighting from anywhere providing the price is OK.
It is made in Italy No other model Number on the machine
Thanks
-
19th May 2016, 11:29 PM #41Novice
- Join Date
- Aug 2013
- Location
- adelaide
- Posts
- 16
Hi China, did you ever find the rise/fall bits for your durden? i have a UP 10/600 very late production you can have a look at if its any help. (ps I'm not experienced with this posting bizo so I hope this gets in the right spot.)
-
3rd July 2016, 08:57 PM #42New Member
- Join Date
- Aug 2014
- Location
- Gippsland
- Posts
- 5
Hi all, I'm looking for the grinding cup for on the onboard grinder on my Wadkin RK thicknesser and also the table fences for a Wadkin LS router. Cheers
-
7th December 2016, 09:23 PM #43
Hi all, good idea for a thread...
I'm after a guard for my wolfenden 1957 bh jointer. Happy just to have some detailed photos and/or description of the mechanism with rough dimensions if possible.
Cheers
Leanne
Sent from my iPhone using Tapatalk ProI think, therefore I am... unable to get anything finished!
-
8th December 2016, 01:31 PM #44
-
10th December 2016, 03:57 PM #45