Thanks: 2
Likes: 20
Needs Pictures: 0
Picture(s) thanks: 5
Results 31 to 37 of 37
Thread: Wadkin Super 500 parts manual
-
25th August 2023, 01:12 AM #31
Have you ever used a power feed on timber up against the fence Micheal? As in for edge jointing of long boards?
Ive never used a fitted power feed unit on anything. When passing long table top board edges across the buzzer, like 3.4 long x 400 wide x 60 Oak. That was by hand with three of us. Ive found myself wondering about power feeding against the fence. They don't come that big very often. 3M x 250 x 50 or 38 thick is a more common size.
Rob
-
25th August 2023, 07:28 AM #32
I have done the jointer like that but to be honest I didn't like it much.
Best method I worked out when making 30 pine bookcases for a job.It was all 250x25 Hoop Pine.
I laminated up some timber extensions for the spindle moulder fence about 900mm long each side.Offset the fences and used the power feed to feed the boards on their flat sides.Had a roller set up each side of the spindle moulder to help with the feed in and out.Worked perfectly and no balancing act with the wide boards.I used a big Wadkin serrated blade head with the cutters hanging out a bit which gave a nice big cutting diameter and a great planed finish.
Same setup then for the rebate for the ply back in the cases.
The spindle set up would still be easier even without the power feed for jointing wide boards.
So happy with that that I mounted the power feed onto the panel saw next and power fed them through to rip them to width.The cut was fine to use as the back edge of the bookcase.
My old Jet 500mm thicknesser wouldn't go down enough to dress the edges parallel.
Funny how back then I thought nothing of shifting a big power feed from machine to machine.Picked up that little one the other day and wished I hadn't.Cheers from Micheal.
-
25th August 2023, 10:30 PM #33
How about a genuine Wadkin power feed?
PC300133.JPG
I wonder if it left rubber burn-out marks all down the timber?
Cheers, Vann.Gatherer of rustyplanestools...
Proud member of the Wadkin Blockhead Club .
-
26th August 2023, 07:23 AM #34
Well that thing is spectacular.
Lower the tyre pressure and it would slide the RD across the floor.
Now I know why they put the hold down bolts into the floor when the RD already weighed 600 kgs.
Does it have a part number and description anywhere in the library?Cheers from Micheal.
-
26th August 2023, 09:15 PM #35
This is all I have.
PC300132.jpg
I believe it's from a 1952 catalogue - though I would have thought it's more 1930s.
- the RD in the pictures has a 1936 to 1951 style of tag (not very helpful).
- the switchgear door on the RD has a reset button which was eliminated about 1946.
Cheers, Vann.Gatherer of rustyplanestools...
Proud member of the Wadkin Blockhead Club .
-
27th August 2023, 07:17 AM #36
Nice bit of info.Thanks Vann.
I do enjoy a bit of machinery history.Cheers from Micheal.
-
28th August 2023, 08:16 PM #37SENIOR MEMBER
- Join Date
- Apr 2013
- Location
- Brisbane
- Posts
- 623
Has anyone ever seen that power feeder in the flesh before?