![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 31 to 45 of 48
Thread: Reasonably Priced Chisels
-
31st August 2011, 09:34 PM #31
Intermediate Member
- Join Date
- Sep 2010
- Location
- Melbourne
- Posts
- 0
Thanks, I got a reply from them and the VAT will be deducted and a rebate for any excess shipping costs. I'll keep watching the Aus $ climb back up a bit more and make the purchase soon I hope.
-
22nd November 2011, 10:42 PM #32
Intermediate Member
- Join Date
- Sep 2010
- Location
- Melbourne
- Posts
- 0
Ok time for an update. So I was watching the Aus $ rise up, then the Euro zone crisis hit and now it's heading down the slope in the currency roller coaster. I knew I should have bit the bullet earlier and ordered them when the dollar was still good
. Anyway I've been keeping an eye on the Workshop Heaven site and they've finally gone on sale
. So now I'm waiting for a full set of the cabinet makers chisels and a set of mortice chisels to be shipped
.
-
22nd November 2011, 10:58 PM #33
Intermediate Member
- Join Date
- Jun 2010
- Location
- Perth
- Posts
- 0
-
23rd November 2011, 08:24 AM #34
Re change of handle
It looks like they have two different sets with different handles, the 8882 and the 8112
I think the 8112 is the set that Tony boughtregards
Nick
veni, vidi, tornavi
Without wood it's just ...
-
23rd November 2011, 06:05 PM #35
-
23rd November 2011, 07:38 PM #36
About a month and a half ago i contacted Narex Bystrice and ordered direct from them via an email.
Thanks to Filip from Narex I received a well packaged box of chisels within 8 days of placing the order. (Thanks to Brunswick who let me know that postage from Czech republic would be aok)
I ordered the larger horn beam handles which feel good in my hand. The chisels are finished ground and not polished. The small chisel was not yet available in the larger handle.
I found the chisles to be well finished. Some of the handels however look a bit thirsty and require a bit of finish.
I need to give them a polish and will let you know how they go.
-
23rd November 2011, 07:46 PM #37
I'm pleased you're still happy with them
On the basis of your report a set ended up in my shed, not exactly sure how
I'm happy with them but yet to misuse them with real intent, but I did chisel out a mortise with them when they arrived - first time I'd ever done that without drilling etc - twas fun
got the corner chisel as well, haven't used it yet and am a little concerned with its looks, seems to have been nickel plated after shaping, grinding and sharpening. Anyway we'll see.regards
Nick
veni, vidi, tornavi
Without wood it's just ...
-
23rd November 2011, 10:14 PM #38
Intermediate Member
- Join Date
- Sep 2010
- Location
- Melbourne
- Posts
- 0
-
24th November 2011, 07:37 AM #39
Chopping a mortise out by hand is fun...the first time.
I drill them all out now.
I'm not that impressed with the corner chisel. It's a bit fragile. Probably ok for softer woods (haven't used any of those for a while) but it struggles in our hardwoods. Needed lots of resharpening so I just use the other chisels to clean up the corners.
-
28th November 2011, 06:19 AM #40Some days we are the flies; some days we are the windscreen
-
2nd December 2011, 07:37 AM #41
well aged but not old
- Join Date
- Sep 2004
- Location
- Brisbane
- Posts
- 0
I bought a set of Stanley Bevel Edged Chisels about 12 years ago. I do not remember what they cost then but it was not much. They range in size from 1/4" to 1 1/4".
They do what chisels are suppose to do. That is to say , they chisel. They hold a razor sharp edge and I suppose that if I am still alive in another 30 or 40 years I will still be using them.My age is still less than my number of posts
-
9th December 2011, 06:04 AM #42
Mine have arrived. Not very sharp (maybe I have tough arm hair!) and they are bigger than I expected. The mortice chisels in particular are quite large. Finish is quite good. Still some grinding marks on the side of the blades. I bought some scrapers too (not Narex) and the whole package came in quite a big box. Packaging was OK, not great. 1 chisel has no edge guard, and most of the guards are not specifically sized for the chisel (2-3 sizes fits all).
Haven't used them in anger yet, but they look like they will stand up to a good fumpin, which is what they were intended to do.
TravSome days we are the flies; some days we are the windscreen
-
10th December 2011, 11:14 PM #43
Intermediate Member
- Join Date
- Sep 2010
- Location
- Melbourne
- Posts
- 0
I've got all mine also. A bit of mistake with the packing of the first delivery
(the mortice chisels were missing), but an email and a week later and they arrived. I'll have to agree the mortice chisels do seem quite large, but these are my first set. Now to find some time to sharpen them up and a project that needs their use.
-
18th December 2011, 12:09 AM #44
Banned
- Join Date
- Oct 2011
- Location
- Sydney
- Posts
- 1
I found that in Austrailia that Bahco chisels seem to be the best on the market but to be honest I would still prefer to buy the original marples from the UK they have the red and yellow handle they roughly cost about $80 plus P&P
-
7th January 2012, 11:51 AM #45
Narex Mortising chisel - video
Found this video on the Narex mortising chisels
here
enjoyregards
Nick
veni, vidi, tornavi
Without wood it's just ...