A Tall Shed Story from My Shed Supplier

[Sprog]

Anyhow, my investigation continues. Other neighbour thinks Shedman products are good for the price.
DC

The Shedman workshops are a good quality and reasonable price.
http://www.shedman.com.au/pricelist/pricelist.htm

Check out one of the display centres before you decide.
http://www.shedman.com.au/Displays/WAdisplay.htm

[dzcook]

has anyone ever looked into frieght containers as sheds have seen a mob here in qld that are selling containers to live in ie granny flat style with bathroom and they seem quite cheap all windows and doors etc installed but they also have jut empty ones with windows doors and was thinking they might be good ( at least you couild take all your tools with you when you move ) but they would be a lot pricey than a shed i suppose

my shed in progress will never blow down or anything as its made out of steel railway line that has been cemented into ground to form the uprights and then the bearers have been bolted to those and metal screwed to that but needs a better floor and power to it before i can really se it up and also some extra windows would be nice
the old bloke that used to own the hse muct of had mate on the railway as rail line has been used everywhere the old outside laundry is held up on one side with rail the old outside dunny is also framed with it and the long steel pipe holder frame in the yard is it as well

[batcat]

has anyone ever looked into frieght containers as shedsl

We used one for about 5yrs as a storage shed. Cost us $2000+delivery.
If you're going to get one I suggest you get one of the insulated ones, as we did. We didnt have problems with condensation inside (that surprised me, I thought it would be an issue).
We didnt need windows or doors, but did get a sparkie to install a couple of fluros in it.

[Wild Dingo]

has anyone ever looked into frieght containers as sheds... snip... but they would be a lot pricey than a shed i suppose

Im still cogitating that route... I bought a 40ft x 9ft seatainer from Royal Wolf here in Perth when we first moved down here for $3500 delivered... I went up there and selected the seatainer I wanted from the MULTITUDE they have the bloke was pretty good getting the forklift operator to bring down 5 of the things from WAY up top for me to go over before deciding... they put new seals on the doors the floor was given new sheets of 1in ply it was painted inside... no dings no rips and the top (most important you get a gander up there man there was some rust on some of them!!) was great.

In the two years since its not leaked once no condensation but gets BLOODY HOT in summer in there!!...

Ive moved it behind the shed and its presently a storage unit for the surplus family gear.

Actually thinking about this I might wander up and ask the shire bloke tomorrow as Ive gotta see him anyway... Ive often thought of getting 2 of these things 7500 - 8000 delivered and set wherever I choose... Im thinking of putting them 20ft apart then making a cover and sides throw up some doors and bam instant SOLID 40ft x 9ft either side of a 20ft x 40ft area!! man that would be a good shed or what!! then factor in the existing 6mtr x 9mtr shed AND the existing 40ft x 9ft sea tainer and MAN OOOOOHH MAN!!!...

You would need to get hold of a oxy acetaline set to cut the doors and windows but theyre not that dear to hire for a day (get it friday arvo and youve got it for the weegen!!) keep the cut out weld some angle to it and use it as the door and window... not hard just time consuming

But for what shouldnt be much more than $13000 you would have one hell of a shed! You could get a couple of 20fters but they are not that much cheeper than the 40 and if youve got the room then get the bigger one (finances a given of course!) oooh okay you gotta add in for the metal for the top eh? duhhhh geez sometimes I gotta wonder at meself... okay lets up the anti to what? about 16000 - 17000 tops?... mmm getting up there eh? ANYWAY!! its a thought that keeps rattling around my head

Anyway I will get back with what the shire bloke says

[davo453]

I had a shed built when we lived in Bullsbrook (North of Perth) by a Maddington company, WA sheds http://www.washed.com.au/

It was 3 years ago though, we were happy with the price, product and service. The shed was a biggish one though 12 x 30 metres, I think they do smaller ones as well.

It was a strong shed, the wind really blew on top of that hill in Bullsbrook.

Cheers



Dave

[maungshay]

Hey Damon, I hear you loud and clear.
There are so many dodgy shed comapny's around WA at the moment, all claiming to be the best. I'll tell you and others of a secret I found out recently. Did you know most company's advertising in WA are actully from NSW, QLD and SA?? The best WA comapny at the moment by a street is a small outfit called Garage Wholesalers in Maddington. Great sheds, great service and only a small premium to pay for quality with no stress. Give them a go, you won't be disappointed.
Cheers,
Maungshay

Hi All Shed Lovers,

I thought I would share with you a tall story from a Perth Kit supplier- I have been doing the investigations around the suppliers and selected a pre fabricated 6 x 3 x 2.4 shed and a 3.1 x 1.2 x 2.2 storage locker Colourbond Classic Creme from a brand as advertised in the Sunday Times / West Australian. Price good at under $2K and upon inspection at their premises was solid and adequate for my job.

Ordered it 6 weeks ago with a promise of a three week turnaround, OK happy with that. Called after 4 weeks, young bird on the desk was pretty cagey, said she would look into it, no reply, 5th week called again, said she would check with boss.

6th Week and the story comes out. "Really sorry about this, but the installers rolled the trailer last week with some of 6 x 3 in Creme and lost all the load. The persons due to have theirs installed that day jumped up the queue and now we do not have enough material for yours, sorry" "We aren't ordering any kit for at least 3 months while they reconfigure the factory for fencing" so that's it, no shed, nothing, zip!!!!!!!! "Sorry" "We have plenty of green ones " was the consolation prize....Never mind that I ordered cream and live in the Classic Cream Capital of the world (Perth).

I never blow my stack (being an IT project manager you cannot), but though what a load of tripe, seriously is this the best they could come up with. I'm glad at least I did not put down any $ deposit and I'll definitely take my business elsewhere.

And then that leaves me back to square one. Need a kit build 6 x 3 x 2.4 workshop that won't break the bank. Every $ saved goes toward the tools....

Please feel free to trump me with your tall stories and / or reccomendmend a descent supplier of kits that are not going to sting me >3.5K !!!

Cheers........DC

[Vernonv]

Hey GW, you wouldn't happen to be connected to Garage Wholesalers would you.

Fancy that, your initials are the same as the initials of Garage Wholesalers. How's that for a coincident.

[DJ’s Timber]

Hey Damon, I hear you loud and clear.
There are so many dodgy shed comapny's around WA at the moment, all claiming to be the best. I'll tell you and others of a secret I found out recently. Did you know most company's advertising in WA are actully from NSW, QLD and SA?? The best WA comapny at the moment by a street is a small outfit called Garage Wholesalers in Maddington. Great sheds, great service and only a small premium to pay for quality with no stress. Give them a go, you won't be disappointed.
Cheers,
Maungshay

Maungshay, why not come straight out and tell us that you're Garage Wholesalers. It is fairly obvious from your email address who you are.

Please familiarise yourself with the forum rules regarding advertising and use the appropriate forum.

Also be aware that advertising is a sensitive issue on the forums at present and the moderators will not hesitate to "shoot first" for any infractions.

DJ
Super Moderator
Woodworking Australia's
WOODWORK FORUMS

[manoftalent]

for what its worth, I just googled this up http://www.buyashed.com.au/3mx6m-wor...rbond-p-8.html

[Stuart]

for what its worth, I just googled this up http://www.buyashed.com.au/3mx6m-wor...rbond-p-8.html

That looks very familiar....wait....can it be - the twin of my one that blew down in one of Melbourne's notorious storms?

Hang on....Melbourne doesn't have notorious storms so why did the shed blow down?

[Harry72]

Ever looked at www.shedsonline.com.au ?

[Stuart]

No I hadn't - thanks for the link!

Looking at their range, I wish I wasn't in suburbia - don't have enough land for even a half reasonable shed!

[maungshay]

Damon_11, if you are still in the markert for a quality shed let me know.

Hi All Shed Lovers,

I thought I would share with you a tall story from a Perth Kit supplier- I have been doing the investigations around the suppliers and selected a pre fabricated 6 x 3 x 2.4 shed and a 3.1 x 1.2 x 2.2 storage locker Colourbond Classic Creme from a brand as advertised in the Sunday Times / West Australian. Price good at under $2K and upon inspection at their premises was solid and adequate for my job.

Ordered it 6 weeks ago with a promise of a three week turnaround, OK happy with that. Called after 4 weeks, young bird on the desk was pretty cagey, said she would look into it, no reply, 5th week called again, said she would check with boss.

6th Week and the story comes out. "Really sorry about this, but the installers rolled the trailer last week with some of 6 x 3 in Creme and lost all the load. The persons due to have theirs installed that day jumped up the queue and now we do not have enough material for yours, sorry" "We aren't ordering any kit for at least 3 months while they reconfigure the factory for fencing" so that's it, no shed, nothing, zip!!!!!!!! "Sorry" "We have plenty of green ones " was the consolation prize....Never mind that I ordered cream and live in the Classic Cream Capital of the world (Perth).

I never blow my stack (being an IT project manager you cannot), but though what a load of tripe, seriously is this the best they could come up with. I'm glad at least I did not put down any $ deposit and I'll definitely take my business elsewhere.

And then that leaves me back to square one. Need a kit build 6 x 3 x 2.4 workshop that won't break the bank. Every $ saved goes toward the tools....

Please feel free to trump me with your tall stories and / or reccomendmend a descent supplier of kits that are not going to sting me >3.5K !!!

Cheers........DC

[MALPT]

Actually thinking about this I might wander up and ask the shire bloke tomorrow as Ive gotta see him anyway... Ive often thought of getting 2 of these things 7500 - 8000 delivered and set wherever I choose... Im thinking of putting them 20ft apart then making a cover and sides throw up some doors and bam instant SOLID 40ft x 9ft either side of a 20ft x 40ft area!! man that would be a good shed or what!! then factor in the existing 6mtr x 9mtr shed AND the existing 40ft x 9ft sea tainer and MAN OOOOOHH MAN!!!...

Something like this but a better roof maybe...............

How did it go with the shire council??

Rob

[ian]

Yee ha

Seriously, I would have thought that the engineer who specified the shed could be liable in negligence or contract in any state. The builder, if building to specs, would not generally be negligent but could be liable in contract if they are doing a supply and erect. It's all a question of what the facts are in each particular circumstance.

Based on my shed building experience, the supplier supplied the materials, design and engineering details. They also provide an erection service. I think that is the norm for most suppliers to do the lot and make money on every stage. I cant see how they could possibly escape liability if they ultimately design the shed and it is erected correctly. Is is possible that they haven't distinguished between supplier and builder?

If I use this example, then the builder is on the hook. I approach ACME Builders and say I wanna big shed. They say no probs, that'll be 20 grand. I pay, they build. There, my contract is only with the builder and he is my first port of call if the design is not up to scratch. Negligence is also a possibility against a third party but I not going to go on about tort law here.

But as I said above, it all depends....

Boban

thinking back to when I did structural design 30 years ago, I recall that the design wind loading for a temporary structure was the 5 year return storm (only hospitals got designed for the 100 year storm). Given that in many places you don't need planning permission to errect a shed, I'm surmising that sheds are treated as temporary structures — so any decent storm will blow one over.

After Cyclone Tracey, wind design rules changed in the cyclone zone, but I don't think they changed elsewhere.


ian