Tough Machinery Perth

[Norm]

I have just read your thread and if you are still interested I do have parts available. Norm

[scott hawkins]

Can you source a tailstock and toolpost for a tough wood lathe? cheers scott

[Norm]

Can you source a tailstock and toolpost for a tough wood lathe? cheers scott

Yes I can. Please advise if still interested.

Regards
Norm

[Paul Kilpa]

Hi there Norm, I am a new member and picked up your post. I am restoring an old 4 speed Tough drill press and might need a spindle retaining nut for the bearings. Hoping you might pick this up an can make contact with me in Melbourne. Many thanks Paul 0425882217

[kennykoala]

Hi what parts do you have mate ?

[Paul Kilpa]

Hi there kennykoala. It’s virtually complete, repainted and new bearings. On reassembly, I think it is missing either a spacer or second lock nut where the quill passes through the top machined piece. What I have is one nut and a lock washer. The lock washer will not go far enough down the quill to be able to lock the locknut. Seems I am missing either a second locknut or a spacer. This is at the top of the quill where the pulley attaches. Can send photos if I haven’t explained it well. Regards Paul

[Shanejo1]

I purchased Tough Drill and woodlathe parts back in the early 90's and still have drill parts. I can manufacture most parts if I do not have remaining stock.

Hi Norm, do you still have quill springs for the pedestal drills? I’m in Perth and chasing one for a drill I’ve purchased.