Thanks: 0
Likes: 5
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 30 of 32
Thread: What timber to use???
-
24th June 2013, 12:10 PM #16... and this too shall pass away ...
- Join Date
- May 2012
- Location
- Brisbane (Chermside)
- Age
- 71
- Posts
- 2,042
IanW speaks the truth.
I have learned this truth the hard way.
Cedar is a bugger to chisel, even with very sharp tools and a reduced angle. If you proceed, be prepared to hone the cutting edges regularly, and as Ian suggests, work slowly and cautiously. Please also take his advice and do a few test runs on some scrap before you approach the job proper.
I love cedar, but try to avoid methods that require clean chisel cuts. Even squaring up the corners of the rebate I rout into a cabinet to fit the back must be done very carefully. Where possible I now round off the back to match the router cut rather than approach cedar with a chisel.
-
24th June 2013, 03:26 PM #17GOLD MEMBER
- Join Date
- Aug 2011
- Location
- bilpin
- Posts
- 3,165
The quality of Cedar very much determines its workability. Much of the Cedar sold today is young and or fast growing stuff which can create all sorts of problems when it comes to working it. Old growth, dark red, lowlog material will work as well as a prime piece of Walnut.
-
24th June 2013, 06:26 PM #18... and this too shall pass away ...
- Join Date
- May 2012
- Location
- Brisbane (Chermside)
- Age
- 71
- Posts
- 2,042
-
24th June 2013, 07:16 PM #19
The first statement I agree with, Rusty, but my own experience doesn't support the second. I've worked quite a bit of dense old cedar, coming from the Atherton Tableland, & plenty of (American) walnut in my years in Canada. While most old-growth cedar is far, far better to work than some of the imported coloured Balsa that's sold as red cedar, I don't think I have ever struck any cedar that cuts as crisply & cleanly as Black Walnut. I hate to be un-patriotic, but I would class Walnut as a superior cabinet timber in just about every respect. If I was to nominate a local wood that compares in workability to Walnut, I reckon I'd choose Qld Maple rather than cedar....
Cheers,IW
-
24th June 2013, 07:53 PM #20GOLD MEMBER
- Join Date
- Aug 2011
- Location
- bilpin
- Posts
- 3,165
Well there we go, another difference of opinion. Most of the quality cedar was purchased by the railways. My first trade was done there. The quality of the cedar was exceptional and I will stand by my statement. As for walnut, I love the stuff and agree that as a working timber it is hard to beat. I do about a dozen rifle stocks a year and have done so for about forty years. Should you ever be down this way I would be happy to show you cedar that would rate with any walnut. I think you will find that what we get down here is of much better quality than up north. It is slower grown and thats important for dense material.
-
24th June 2013, 08:41 PM #21... and this too shall pass away ...
- Join Date
- May 2012
- Location
- Brisbane (Chermside)
- Age
- 71
- Posts
- 2,042
All this discussion is very interesting, but not always material, depending on what you value most and what you are looking for.
For me, workability ranks behind looks and how the timber performs in service, but others think differently. Even then, these things change with circumstance. I have used cedar for my bedroom furniture, and am happy with the choice, but it would not occur to me to use it for my grandsons' bedrooms.
In addition, many of the much vaunted cabinet timbers are now in such short supply (especially quality material) that they have become wickedly expensive. A mate in Indiana tried to buy some good quality cabinet grade American walnut a couple of years ago. At last reports he was still trying to catch his breath after hearing the price. A few years ago, NG rosewood was relatively inexpensive. Got a quote today for $3,400 per cube, plus GST. Things have changed.
Then there is good old personal choice, and there is no accounting for taste. Usually, I don't like waney edges on furniture; others love it. That's fine. We like what we like.
Finally, we should return to the original question. By my reckoning Ian was correct to suggest that the cedar available today does not chisel well. It is likely true that old growth, low log material does chisel much better, but I am unable to source such material. If anyone knows of a source of such timber, please post the details. I like red cedar enough to buy some top quality timber and put it to stock. The same goes for NG Rosewood.
Andrew said, " My concerns are movement, making sure i use timbers that are not too oily and something that is not too hard or soft to work with."
My vote still goes to Camphor Laurel, followed by NG Rosewood. They are pretty, work well and have low movement in service.
-
24th June 2013, 11:50 PM #22GOLD MEMBER
- Join Date
- Aug 2011
- Location
- bilpin
- Posts
- 3,165
One of the advantages of saucing and milling your own timber is the pleasure of coming across some nice stuff that hasn't been picked over by every Tom, Dick and Harry. Some years back,I had the opportunity of getting hold of a landslide cedar on the mid north coast of NSW. This tree went 1.6m at breast height, was growing on the south western face of a steep incline. The whole thing came down, roots and all, after some prolonged heavy rain. Upon doing a ring count, we got back to 1770 and there was still quite a bit before we hit the centre but the rings were too tight to count with the naked eye. The timber sawn from this tree has been an absolute joy to work. If it wasn't for the colour, you would swear you were working walnut.
-
25th June 2013, 08:49 AM #23
That sounds like a pretty special tree alright, RN - a windfall in every sense of the word. Wish something like that would fall into my hands! I get an occasional backyard tree after a big storm, and as much she-oak as I can manage from my brother's place (which is 1800Ks away, unfortunately), but the only wood I can get to mill for myself semi-regularly round here is Camphor Laurel. It's ok for some jobs (in fact rather good for blanket boxes!), but I don't think I would want more than a couple of pieces of CL furniture in any one house. A tree like yours could keep me very busy & very happy for a year or two, I reckon...
Cheers,IW
-
25th June 2013, 09:00 AM #24... and this too shall pass away ...
- Join Date
- May 2012
- Location
- Brisbane (Chermside)
- Age
- 71
- Posts
- 2,042
Absolutely. Sourcing good timber is my biggest issue right now. As someone who does not have the contacts who source and mill their own trees, I can seldom get the stuff I want. I know of a bloke who imported some beautiful burl recently, and badly wanted some for the drawer and door fronts of a desk I will soon make. But I am told most of it was cut into pen blanks, because that was the best economic outcome for the importer. I could have wept.
-
25th June 2013, 06:56 PM #25Member
- Join Date
- May 2013
- Location
- Bli Bli
- Posts
- 58
-
25th June 2013, 07:17 PM #26Member
- Join Date
- May 2013
- Location
- Bli Bli
- Posts
- 58
Yes I wanted to dovetail the plinth, and I was considering a surround on the top that also was dovetailed. I have some experience with dovetails but not in cedar. I was planning to do lapped dovetails. Would you recommend on not using the cedar?
Another question for you, do you think I should draw up a proper shop drawing? When I do furniture for myself, I usually just wing it. Make changes as I go and decide on things when I get to them. I will need some kind of cutting list for the quantity of timber. But is a rough idea in my head ok? I am interested in your opinion.
I plan on putting some small drawers at the bottom. I was going to mortice and tenon the drawer rails into the box.
Big glue up job but I like the challenge.
Andrew
-
25th June 2013, 09:44 PM #27
Andrew, you should use the wood you want, it's your project! I was just warning you that cedar can be difficult stuff to cut with chisels. If you practice on some scrap, you'll soon get the feel of it..
Well, I would at least do a good sketch, myself. You will need something to work out your wood sizes & requirements. Giving a wood supplier a reasonable 'cut list' means they can make up your order with minimum waste. I confess I don't often do a set of 'proper' drawings unless making something complex that I've not tackled before, but they can be very helpful. A scale plan and elevation allows you to check that the proportions are in the ball park, too - I made some god-awful lemons "out of my head" in my early days! If I am making something simple like a table, I usually just do an 'isometric' sketch, on which I mark dimensions, but may do detailed sketches of any complicated sections, to work out the joinery. That's pretty straightforward in your case, but you do need to think through how any internal parts like drawer runners are going to be set in place as you assemble the sides. In doing a sketch, you get to think things through, and (usually!) spot any steps that are going to be impossible if you don't do them in the right order. I guess I'm thinking of something like a cabinet with dividers & drawer runners fitting in sliding dovetails, where you have to assemble in the right order, or find yourself with a few bits left over....
And just because I have a plan doesn't mean I can't change things as I go along! For example, I might find the rough wood I had set aside for door panels doesn't clean up quite wide enough, & the stiles need a few mm added each side. Such things are easier to calculate if you are working with a set of detailed sketches.
But everyone has his/her own way of working......
Cheers,IW
-
25th June 2013, 10:02 PM #28Intermediate Member
- Join Date
- Mar 2012
- Location
- uki
- Posts
- 31
Hello Andrew,
Have you seen any silky oak. You may have the local nsw version - grevillia robusta around there, I don't know. True silky from Qld will go browner with age, the grevillia will go more orange brown. I have enjoyed using both-very good to work and can provide some wild book matching because of the medular ray grain. Both very stable timbers. Whatever timber you choose you can always put a camphor panel into the chest to keep the insect repellant properties.
Cheers Tony.
-
26th June 2013, 08:04 PM #29Member
- Join Date
- May 2013
- Location
- Bli Bli
- Posts
- 58
-
27th June 2013, 07:44 PM #30Member
- Join Date
- May 2013
- Location
- Bli Bli
- Posts
- 58