Page 2 of 2 FirstFirst 12
Results 16 to 23 of 23
  1. #16
    Join Date
    Nov 2003
    Location
    Australia and France
    Posts
    2,869

    Default

    Yep David, we have consensus.

    BOG IT UP!!!

    P

  2. #17
    Join Date
    Nov 2004
    Location
    Port Pirie SA
    Age
    52
    Posts
    0

    Default

    Quote Originally Posted by DavidC
    Cant do that or the poly will come off and have to be restained
    ????Huh

    Why would the poly come off, what im saying is plane or cut down wood that is of the same type to fill the gaps, you wouldnt need to touch your current skirtings with a plane only the new peice(s) that you'll be adding too it!
    ....................................................................

  3. #18
    Join Date
    Dec 2004
    Location
    Brisbane
    Posts
    0

    Default

    I would put nothing there. As others have said, no-one is going to see. My motto is- the more stuff to put somewhere, the more stuff you have to deal with when it is time to re-fresh... like when the speaker of the house has a brain wave and a new project is on the go.

    Quick note on floor skirtings, mine are held in with the smallest nails possible I can pull them of with my hands or with a little force with a chisel. This makes rapainting much easier, and the skirtings can be freshened up in the shed at a comfortable height. You also ends up with clean lines where the different paints meet.

    Cheers,
    Conwood

  4. #19
    Join Date
    Nov 2003
    Location
    Beachport, South Oz, the best little town on the planet.
    Age
    73
    Posts
    776

    Default

    Sell the house quick cos it's obviously rooted! :eek:

  5. #20
    Join Date
    Jan 2005
    Location
    Sydney
    Posts
    37

    Wink Solution

    Well fellas I managed to get rid of the gaps what I did was get under the house and bang the retched floorboards up around edge of skirting
    shimmed the boards and now the gaps are reduced to 2mm
    this I'm not going to worry about
    I can live with 2mm

    It only took me the best of 10mins to get under house and bang boards up

    Cheers !!!!

    Thanks for youe input

  6. #21
    Join Date
    Jan 2004
    Location
    Blackburn, Vic
    Age
    57
    Posts
    424

    Default

    Quote Originally Posted by DavidC
    It only took me the best of 10mins to get under house and bang boards up
    That's so often the way, you put off doing something cos you think it'll be hard and when you finally get round to doing it, it's easy and done in no time. And other times, you think you're starting a 15 min job and then wonder where the day went.

    Simon
    They laughed when I said I was going to be a comedian. They're not laughing now.
    Bob Monkhouse

  7. #22
    Join Date
    Mar 2004
    Age
    77
    Posts
    151

    Default

    If you are sanding the floor, I've heard that you can mix the sawdust with something (glue? silicone?) and use that to fill the gaps. This apparently gives you a colour that matches the floor.

    There is probably someone reading this who knows more about it than I do.

    Then again, you could buy some synthetic rope in a diameter a bit bigger than the gap and jam that under the skirting board. Would keep out draughts and stop little things being pushed into the underworld (never underestimate the minds of little people). No-one is really going to notice the gap unless you point it out to them.

  8. #23
    Join Date
    Aug 2000
    Location
    Brisbane,Queensland,Australia
    Age
    78
    Posts
    45

    Cool

    Whos going to notice the gap, How many partys do you have in your BEDROOM
    Remember if ther were no Mondays there would be no weekends.
    (I'm retired now so to hell with mondays)

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •