Page 2 of 2 FirstFirst 12
Results 16 to 30 of 30
  1. #16
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    2,453

    Default

    Quote Originally Posted by Sturdee View Post
    Thank God that we have different jurisdictions with different laws and regulations. Otherwise we, in Victoria, would be inflicted by the many restrictive regulations and laws that apply in the other states. Many a times I read of requirements that are applicable in NSW or Qld that don't apply here.


    Peter.
    Yes Peter, there are good and bad in every jurisdiction - no one state has all the good or all the bad. Qld e.g. has the best petrol prices (of the eastern states anyway) but probably the worst environmental record as a whole, particularly in the 70s and 80s. They are even considering putting a coal loader near the Barrier Reef . Currently NSW appears to be the corruption champs from the previous administration.
    Last edited by Bedford; 19th December 2013 at 08:28 PM. Reason: Off topic.
    Regards, FenceFurniture

    COLT DRILLS GROUP BUY
    Jan-Feb 2019 Click to send me an email

  2. #17
    Join Date
    Aug 2011
    Location
    bilpin
    Posts
    510

    Default

    Brett! Settle! This is not the end of the world. You have a nice new machine and the ability to do things you couldn't do before. For what its worth, every industrial machine I have ever bought has come with a short bit of lead and no plug. I now expect it. Even second hand machine suppliers cut the plug off before delivery. I guess the only reason your machine had the short bit of cable was to show type and orientation.
    Merry Christmas mate. Keep smiling.
    Last edited by Bedford; 19th December 2013 at 08:29 PM. Reason: Off topic.

  3. #18
    Join Date
    Aug 2010
    Location
    ACT
    Age
    85
    Posts
    546

    Default

    Funny enough all my cheap & dicey tools have come with the longest leads (GMC etc.)
    Just some thing I had noticed..
    Regards
    Hugh

    Enough is enough, more than enough is too much.

  4. #19
    Join Date
    May 2010
    Location
    Not far enough away from Melbourne
    Posts
    1,384

    Default

    Quote Originally Posted by FenceFurniture View Post
    Yebbut don't all the machines from Carbatec et al come with plugs? I've never read that they don't. Gawd save us - even CT supply their Chinese/Taiwanese machines with more than ½ metre of power lead....."
    When I bought my 21" bandsaw from Carbatec it came with a long thick power lead AND NO PLUG. So I bought a 15 amp plug and fitted it. I can see why you are a bit annoyed about such a short lead though. As you said the cost of fitting a decent length of lead at the manufacturing stage is negligible and its easier to shorten it than lengthen it.

    To the best of my knowledge, you dont need any qualification to LEGALLY work on anything that is not plugged in. However that does not mean that just anyone SHOULD do it.

    Like many here I have done it often, as recently as last weekend, and since I start my 39-day holiday today (not gloating or anything ) I bet I do several more over the next few weeks.

    If you know what you are doing, and exercise common sense it should all be good. An example I can cite for how not to do it was something I found at a house I once rented where the power lead connecting an external power point to an external hot water system with a power lead made out of the lead cut off an appliance joined to a power lead with the plug end cut off by twisting the wires and wrapping with sticky tape. The "joint" was dragging on the ground in a drain. Thats what I mean about common sense.

    Cheers

    Doug
    I got sick of sitting around doing nothing - so I took up meditation.

  5. #20
    Join Date
    Aug 2003
    Location
    Conder, ACT
    Age
    77
    Posts
    4,213

    Default

    DISCLAIMER

    No liability is accepted by UBeaut or the Wood Working Forum's administrators
    or moderators for advice offered by members posting replies
    or asking questions regarding electrical work.
    We strongly advise contacting a Licensed Tradeperson for all electrical work.
    WARNING

    Information supplied within posts is not to be considered as detailed formal instructions to complete a task.
    Members following such information do so at their own risk

  6. #21
    Mobyturns's Avatar
    Mobyturns is offline In An Instant Your Life Can Change Forever
    Join Date
    Jul 2012
    Location
    "Brownsville" Nth QLD
    Age
    66
    Posts
    385

    Default

    [QUOTE=FenceFurniture;1728361]Hmmm.
    Unbelievable that a $5600 machine comes without .....
    (all 20 amp, so not cheap)
    QUOTE]

    Is it such a straightforward job? I don't know anything about your setup or situation but a $5600 seems to be an industrial capacity and not a hobbyists machine & seems to be a little outside the straight forward if it requires 20A plugs..

    What power is it?
    What current will it draw on startup, under load?
    Do the circuits in your shed have the capacity for the load & any combined ancillary load? i.e. dust extraction.

    Make sure you set yourself up safely so you can get many years of enjoyment from it rather than have one shocking experience.

  7. #22
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    2,453

    Default

    It's rated as 3000w, 230 volts (so 13A), but also states 19.8A, so that would be the startup draw. Yes I have two 20A circuits installed - one is dedicated to the thicky, and the other for everything else.

    The thread on it is here.
    Regards, FenceFurniture

    COLT DRILLS GROUP BUY
    Jan-Feb 2019 Click to send me an email

  8. #23
    Join Date
    Apr 2011
    Location
    se Melbourne
    Age
    63
    Posts
    189

    Question Short Lead

    Is it possible the short lead is provided so it can be wired first to an emergency stop on the floor?
    As has been mentioned many machines are hard wired.

  9. #24
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    2,453

    Default

    They don't seem to know. All the other machines in the brand have some sort of decent length.
    Regards, FenceFurniture

    COLT DRILLS GROUP BUY
    Jan-Feb 2019 Click to send me an email

  10. #25
    Join Date
    Sep 2010
    Location
    Sydney
    Posts
    267

    Default

    So you wouldn't "plug" the brand or supplier?

  11. #26
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    2,453

    Default

    Quote Originally Posted by Pac man View Post
    So you wouldn't "plug" the brand or supplier?
    Ha bloody ha. Actually, I would, with caveat - it's a great machine, just be aware.
    Regards, FenceFurniture

    COLT DRILLS GROUP BUY
    Jan-Feb 2019 Click to send me an email

  12. #27
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    2,966

    Default

    Quote Originally Posted by Timless Timber View Post
    ..... (others mileage my vary, & I ain't no sparky, & get proper qualified electrical tradesman etc etc etc no doubt the Mods will add such to this thread header soon enough).
    Done.

  13. #28
    Join Date
    Jun 2005
    Location
    Helensburgh
    Posts
    608

    Default

    Having just bought a Felder slider I can say that every single person who does the install themselves has issues which most take in their stride and get on with it. The overall problem came to a head when Felder decided to get serious in the North American market and the Yanks started complaining about the instructions or lack of them. What you receive is a book that is fairly forgettable and for every custom specification a sheet of drawings is included which are not instructions and by any stretch cannot be called instructions. To pacify the Yanks Felder produced some Youtube videos on the slider but it still has large black holes in it depending on the model.


    Why is it so? Apparently it is very unusual in Europe for a machine not to be installed by the factory and they don't need instructions. As for the electrical connection I have now seen three totally different problems on recently delivered machines. Felder will deliver and install and commission any machine bought from them and leave that option to each customer. The fact that I chose to not take up the offer was my choice but i do expect a machine to have adequate docs and the electrical connection to be compliant to the market it is delivered into. It was pointed out to me more than once that the electrical connection was to be done by an electrician and I was always aware of that.
    CHRIS

  14. #29
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    2,453

    Default

    Quote Originally Posted by Chris Parks View Post
    Felder will deliver and install and commission any machine bought from them and leave that option to each customer. .......It was pointed out to me more than once that the electrical connection was to be done by an electrician and I was always aware of that.
    Interesting Chris. He was busily telling me that they were not allowed to fit plugs (and ipso facto longer leads). He didn't have much to say when I asked him how they handle warranty repairs of an electrical nature.

    So do they send a Sparky out to do the install? I think not. Just a matter of saying whatever is convenient at the time.
    Regards, FenceFurniture

    COLT DRILLS GROUP BUY
    Jan-Feb 2019 Click to send me an email

  15. #30
    Join Date
    Jun 2005
    Location
    Helensburgh
    Posts
    608

    Default

    I never went into the details as they did not concern me. Mine had a very short lead and a Euro DIN plug on it as they run the machine as part of QC. Maybe it just missed getting the plug removed but I know of another delivered with the Euro plug. Mine was three phase and required 10 metres of lead and a plug I already had. They had to get right back into the machine connector box to connect, $110 for the sparky.
    CHRIS

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •