Thanks: 2
Likes: 5
Needs Pictures: 1
Picture(s) thanks: 0
Results 16 to 22 of 22
Thread: Tough Machinery Perth
-
28th November 2015, 11:34 PM #16Novice
- Join Date
- Apr 2013
- Location
- Perth
- Posts
- 14
I have just read your thread and if you are still interested I do have parts available. Norm
-
21st February 2021, 11:53 AM #17New Members
- Join Date
- Feb 2021
- Location
- salisbury, qld
- Age
- 55
- Posts
- 2
Tough wood lathe parts.
Can you source a tailstock and toolpost for a tough wood lathe? cheers scott
-
24th February 2021, 04:20 PM #18Novice
- Join Date
- Apr 2013
- Location
- Perth
- Posts
- 14
-
14th April 2023, 10:54 PM #19New Members
- Join Date
- Apr 2023
- Location
- Melbourne
- Age
- 65
- Posts
- 2
Tough drill press parts
Hi there Norm, I am a new member and picked up your post. I am restoring an old 4 speed Tough drill press and might need a spindle retaining nut for the bearings. Hoping you might pick this up an can make contact with me in Melbourne. Many thanks Paul 0425882217
-
3rd May 2023, 12:21 AM #20New Member
- Join Date
- Jun 2012
- Location
- bunbury
- Posts
- 5
Hi what parts do you have mate ?
-
5th May 2023, 12:37 AM #21New Members
- Join Date
- Apr 2023
- Location
- Melbourne
- Age
- 65
- Posts
- 2
Hi there kennykoala. It’s virtually complete, repainted and new bearings. On reassembly, I think it is missing either a spacer or second lock nut where the quill passes through the top machined piece. What I have is one nut and a lock washer. The lock washer will not go far enough down the quill to be able to lock the locknut. Seems I am missing either a second locknut or a spacer. This is at the top of the quill where the pulley attaches. Can send photos if I haven’t explained it well. Regards Paul
-
29th March 2024, 04:06 PM #22New Members
- Join Date
- Mar 2024
- Location
- Perth WA
- Age
- 56
- Posts
- 1