Page 2 of 3 FirstFirst 123 LastLast
Results 16 to 30 of 35
  1. #16
    Join Date
    Jul 2003
    Location
    On the Downs, Darling SEQld
    Posts
    420

    Default Votlages

    3 Phases, 120* between all 3 phases.....This is Normal Domestic in Oz
    415V Ph to Ph,
    240V Phase to Neutral


    2 Phases, 180* between both 2 phases ................Specialised
    480V Ph to Ph,
    240V Phase to Neutral

    When I grew up......Here we go
    We had 24V DC......Truck Voltage

    and ALSO
    32 Volt single phase,
    this was a single Phase Lister Getset, DUG, DUG, DUG, DUG all day long [NO] Not the Old VW Beetle type DUG, DUG, DUG, DUG sound
    Phase to Phase was also 32V
    One phase was tied to Earth most likely, can't remember if there was an Earth.........This was in the last Mellenium
    Navvi

  2. #17
    Join Date
    Sep 2002
    Location
    Minbun, FNQ, Australia
    Age
    66
    Posts
    1

    Default

    Quote Originally Posted by Ivan in Oz View Post
    2 Phases, 180* between both 2 phases ................Specialised
    480V Ph to Ph,
    240V Phase to Neutral
    Rural power, a lot of the dairies up here use it.

    Quote Originally Posted by Ivan in Oz View Post
    ....When I grew up......Here we go
    ....32 Volt single phase,
    this was a single Phase Lister Getset, ....
    We had 32VDC til the late '60s, single cylinder Lister diesel aircooled, more of a Knack, Knack, Knack, sound than the Dug, Dug, Dug that the watercooled ones made. (My grandfather had one of the watercooled ones)
    We had a bank of 16 2V lead acid batteries that were bigger than a modern car battery.
    Cliff.
    If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.

  3. #18
    Join Date
    Aug 2006
    Location
    Muswellbrook NSW
    Posts
    10

    Default

    Please refer to my explaination in this thread!

    http://www.woodworkforums.ubeaut.com...highlight=480v

    The 2phase bit has me worried though, as these welders when run on 415v still only access a single phase!

  4. #19
    Join Date
    Nov 2007
    Location
    Orstralia
    Posts
    256

    Default

    Quote Originally Posted by Ashore View Post
    was this the standard al , cause I thought the standard for 2 phase domestic in Australia was /is 415v
    Guess there is a double standard in the welding trade too .
    Pity you didnt do the research.

    http://en.wikipedia.org/wiki/Two_phase

  5. #20
    Join Date
    Jan 2004
    Location
    Kilmore, near Melbourne, Australia
    Age
    66
    Posts
    781

    Default

    Somewhat off topic (OK totally) but I will be needing a 380 volt 50Hz power supply for an oven I am bringing in to the country from Germany .... anyone got a step-up trannie laying around that will do that for me? Seriously, I think I will need a trannie that can output 10 amps at 380, so any help would be appreciated.

    Thanks
    Steve
    Kilmore (Melbourne-ish)
    Australia

    ....catchy phrase here

  6. #21
    Join Date
    May 2005
    Location
    Newcastle
    Age
    73
    Posts
    1,064

    Default

    Quote Originally Posted by Brickie View Post
    Pity you didnt do the research.

    http://en.wikipedia.org/wiki/Two_phase
    I don't understand your reference to my not doing my research and then giving a link to an intresting site on 19th century power supply, what has 1895 DC generators fitted at Niagara Falls have to do with welding , they did supply 2 phase power as did a lot of generation systems of the era in fact DC generators were built by edison to power whole cities but were quickly superceeded by 3 phase AC and 2 phase power is not to my knowledge produced comercially anywear
    Ashore




    The trouble with life is there's no background music.

  7. #22
    Join Date
    May 2004
    Location
    Melbourne, Australia
    Posts
    0

    Default

    Quote Originally Posted by seriph1 View Post
    Somewhat off topic (OK totally) but I will be needing a 380 volt 50Hz power supply for an oven I am bringing in to the country from Germany .... anyone got a step-up trannie laying around that will do that for me? Seriously, I think I will need a trannie that can output 10 amps at 380, so any help would be appreciated.
    If you think you can get away with 350V (or 360V), it would be easiest to use an off-the-shelf 240V to 110V (or 120V) transformer with the 110V winding wired in series (and correctly phased) with the 240V. This will give 240V + 110V = 350V. (incorrectly phased you will get 240V - 110V = 130V).

    It would be easier enough to get another transformer and also wire it in series to make up the extra 30V if required.

    The only issue is to watch is the primary to secondary insulation rating of the transformer(s).

  8. #23
    Join Date
    Jan 2004
    Location
    Kilmore, near Melbourne, Australia
    Age
    66
    Posts
    781

    Default

    Very interesting thanks ..... can't wait to get this oven and see what happens!
    Steve
    Kilmore (Melbourne-ish)
    Australia

    ....catchy phrase here

  9. #24
    Join Date
    Aug 2007
    Location
    Brisbane
    Posts
    0

    Default

    Quote Originally Posted by seriph1 View Post
    Somewhat off topic (OK totally) but I will be needing a 380 volt 50Hz power supply for an oven I am bringing in to the country from Germany .... anyone got a step-up trannie laying around that will do that for me? Seriously, I think I will need a trannie that can output 10 amps at 380, so any help would be appreciated.

    Thanks
    I would look at the Tranny's used in Valve power amps. I'm betting you'd find a 380V one - not sure about current rating though

    peter
    The other day I described to my daughter how to find something in the garage by saying "It's right near my big saw". A few minutes later she came back to ask: "Do you mean the black one, the green one, or the blue one?".

  10. #25
    Join Date
    Nov 2007
    Location
    Canberra Australia
    Posts
    71

    Default

    Quote Originally Posted by petersemple View Post
    I would look at the Tranny's used in Valve power amps. I'm betting you'd find a 380V one - not sure about current rating though

    peter
    Yep, somehow I think a valve radio tranny won't power an oven. I'm guessing it will have to be a kick ass size to power an oven.

    Possibly the OP will be able to power this on two or three phase depending on a lot of factors, including if it has electronics. Might need to get a sparky to eye ball the installation manual.

  11. #26
    Join Date
    Apr 2006
    Location
    Hobart
    Posts
    126

    Default

    When I lived in the States (Boston) we had a four-wired electrical system, rather than the Australian three wire system. The wires were active, counterphase, return and earth. By connecting between either the active or counterphase and the return wire one got 110 volts AC single-phase. By connecting to between the active and counterphase you got 220 volts two-phase.

    It seeems like you may have an American-standard welder. This may or may not comply with Australian standards. This raises all sorts of legal liability and insurance issues.

    It may be prudent to check with your state electrical regulator before trying to use it.

    Cheers

  12. #27
    Join Date
    Aug 2007
    Location
    Brisbane
    Posts
    0

    Default

    Quote Originally Posted by Uncle Bob View Post
    Yep, somehow I think a valve radio tranny won't power an oven. I'm guessing it will have to be a kick ass size to power an oven.
    Re the oven thing - I have in my online travels recently seen a few australian people selling 415v - 380v 3 phase step down transformersfor operating 380v equipment on Aussie 3 phase. Are you sure the oven is supposed to be single phase?

    peter
    The other day I described to my daughter how to find something in the garage by saying "It's right near my big saw". A few minutes later she came back to ask: "Do you mean the black one, the green one, or the blue one?".

  13. #28
    Join Date
    Nov 2007
    Location
    Orstralia
    Posts
    256

    Default

    Quote Originally Posted by GraemeCook View Post
    When I lived in the States (Boston) we had a four-wired electrical system, rather than the Australian three wire system. The wires were active, counterphase, return and earth. By connecting between either the active or counterphase and the return wire one got 110 volts AC single-phase. By connecting to between the active and counterphase you got 220 volts two-phase.

    It seeems like you may have an American-standard welder. This may or may not comply with Australian standards. This raises all sorts of legal liability and insurance issues.

    It may be prudent to check with your state electrical regulator before trying to use it.

    Cheers
    I have worked in plenty of welding shops that have 480V 2 Faced welders, they may be the older type, but they still worked ok.

  14. #29
    Join Date
    Jan 2004
    Location
    Kilmore, near Melbourne, Australia
    Age
    66
    Posts
    781

    Default

    The oven has nothing in it that I can imagine would use 3 phase, so I can't see why it would need it.... I can't find the bloody pics the seller took for me, but I am sure it has the single phase symbol after the 380.... that being a 1, then a circle with a line through it........ but hey I have been magnificently wrong before!
    Steve
    Kilmore (Melbourne-ish)
    Australia

    ....catchy phrase here

  15. #30
    Join Date
    Aug 2007
    Location
    Melbourne
    Posts
    0

    Default 2phs 240v

    http://users.pandora.be/worldstandards/electricity.htm.
    Check out this site. The nerds guide to worldwide power.
    It says that the yanks use 240v 2 phase.
    The question that needs to be asked is where did you get this welder?

Similar Threads

  1. Ducted air off single phase? or do I need 3 phase?
    By mixin in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 5
    Last Post: 2nd April 2007, 11:28 PM
  2. mobile 3 phase ?
    By Gumby in forum NOTHING AT ALL TO DO WITH RENOVATION
    Replies: 8
    Last Post: 2nd June 2005, 05:07 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •