Results 16 to 22 of 22
Thread: Who is coming to Artisans Expo?
-
25th February 2012, 08:46 AM #16
GOLD MEMBER
- Join Date
- Jul 2004
- Location
- Laurieton
- Posts
- 0
It's OK CH, I can handle rejection.
Bob
"If a man is after money, he's money mad; if he keeps it, he's a capitalist; if he spends it, he's a playboy; if he doesn't get it, he's a never-do-well; if he doesn't try to get it, he lacks ambition. If he gets it without working for it; he's a parasite; and if he accumulates it after a life time of hard work, people call him a fool who never got anything out of life."
- Vic Oliver
-
25th February 2012, 11:54 AM #17
Heavy Machinery
- Join Date
- Mar 2008
- Location
- Lambton, Newcastle, NSW, Australia
- Posts
- 1
Next time you're down this way you'll have to call in for a cuppa and an Anzac
-
25th February 2012, 02:46 PM #18
GOLD MEMBER
- Join Date
- Jul 2004
- Location
- Laurieton
- Posts
- 0
Bob
"If a man is after money, he's money mad; if he keeps it, he's a capitalist; if he spends it, he's a playboy; if he doesn't get it, he's a never-do-well; if he doesn't try to get it, he lacks ambition. If he gets it without working for it; he's a parasite; and if he accumulates it after a life time of hard work, people call him a fool who never got anything out of life."
- Vic Oliver
-
25th February 2012, 08:00 PM #19
Heavy Machinery
- Join Date
- Mar 2008
- Location
- Lambton, Newcastle, NSW, Australia
- Posts
- 1
So how was it guys, a good time had by all. Tony will be out to give me grief I'm sure
-
26th February 2012, 06:09 PM #20
The Laird
- Join Date
- Jan 2007
- Location
- Katoomba NSW
- Posts
- 332
No grief mate. You can't pass up free stuff.
But just to rub it in, it was really good. Spent most of the day there chatting.
Confirmed that I will be doing Howard Archbold's chair making course next year, signed up for a blacksmithing course with Doug Moseley and had a good chat with Colen Clenton and bought one of his 6' Ebony squares as well as some other stuff from Trend and the blacksmith stand.
A very relaxed and friendly atmosphere. I thoroughly enjoyed my day.
Will be back again next year for sure.
-
26th February 2012, 06:54 PM #21
Heavy Machinery
- Join Date
- Mar 2008
- Location
- Lambton, Newcastle, NSW, Australia
- Posts
- 1
Bbarst d
,, I would have liked to have had a chat with old mate the blacksmith too. My new workshop will have enough room for a small forge I'm sure. I bought another small anvil yesterday arvo on a trip to Morpeth with Tack Hama. Where abouts is old mate the smithy at? I know Howard is up Scone way isn't he?
Picked up almost enough timber framing to do one floor of petition wall so saving quite a bit.
Drove past the new digs today and saw the previous tenant taking out the skate board ramps, good sign. I am just chafing at the bit to get in there. Tomorrow I will start the security bars, they shouldn't take too long.
Nice little purchase there too, I got the 4" ebony at Sydney last year, very sweet.
-
26th February 2012, 08:01 PM #22
The Laird
- Join Date
- Jan 2007
- Location
- Katoomba NSW
- Posts
- 332
Yep Howard is at Moonan Brook near Scone. Doug Moseley is based in Port Macquarie but he has a brilliant mobile setup. Have a look at SG's blog. He has some pics and details for the expo.
By the way, I am so impressed by the quality of Colen's tools that I will be adding to my square purchase when funds allow.
Reply With Quote
Similar Threads
-
Artisans Expo - 25 & 26 February
By Ozartisan in forum EVENTSReplies: 0Last Post: 26th January 2011, 12:19 AM
Bookmarks