Page 2 of 2 FirstFirst 12
Results 16 to 17 of 17
  1. #16
    Join Date
    Jan 2013
    Location
    United States
    Posts
    8

    Default Re: Jewelry Armoire Finish Help

    Now im wondering how well a thin veneer will stand up too that process.

    The sample pieces i have are 1mm. I would have to be pretty careful during dry sanding wouldnt I?

  2. #17
    Join Date
    Aug 2007
    Location
    Melbourne
    Posts
    110

    Default

    Do a 240 and a 400 dry and see how that goes. Let the sander do the work. For the wet sand, you can cut out the 800 and just do the 400,1200,1500 and 2 and 4000g. You will still get a very good result. At the end of the process, wipe down the work piece with a clean cotton rag. Give it another wipe down about an hour later. The 2 and 4k won't really take much away at all. And the 1200 and1500 should be safe as well. If you are at all concerned, cut down the number of sanding reps to 5 back and forth.

    Good Luck

    Rob

Similar Threads

  1. CA Finish on wood jewelry??
    By CV3 in forum FINISHING
    Replies: 0
    Last Post: 18th January 2011, 01:45 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •