Ozito saves the day........again!!

[duckman]

Easy to crack open the case and manually adjust it so it doesn't suck anymore. Trouble is they don't blow as well as others I've had.

In all seriousness, if you can tell me how to change it, even if the change is permanent, I'd be very greatful.
I took a look at doing that. There are 101 screws and two (I think) bolts holding it together. I can cope with the screws but the nuts on the bolts are embeded in plastic and so aren't accessible and the heads of the bolts have slots in them but the slots aren't continuous. They appear to be a form of anti-tamper bolt designed to keep people like me out. They have so far been successful.:mad:

Any hints?

[bennylaird]

If it's the same as mine the screws don't need to be undone just the bolts. Mine may be a different model though. I have normal heads on the bolts.

You may have to drill them out and replace them, some electronics shops have the security head kits fairly cheap and they come in handy at times.

[duckman]

If it's the same as mine the screws don't need to be undone just the bolts. Mine may be a different model though. I have normal heads on the bolts.

You may have to drill them out and replace them, some electronics shops have the security head kits fairly cheap and they come in handy at times.

That's interesting. I'll investigate this further. Thanks, Benny.

[zelk]

Time to start an Ozito forum?!
Zelk

[echnidna]

Yeah we might give the domino thread a run for the money

[Wood Borer]

Now you tell me

Felder persuaded me to buy his stuff.

[bennylaird]

Now you tell me

Felder persuaded me to buy his stuff.

Arn't they both the same just different colours?

[echnidna]

so where d'ya get an ozito domino Benny?

[Joash]

so where d'ya get an ozito domino Benny?

you make one

[bennylaird]

so where d'ya get an ozito domino Benny?

Found it at the $2 shop, trouble is I need the full set for a good game as this on is the 1:2 piece

[Wood Borer]

Arn't they both the same just different colours?

Brendan never mentioned that at all.

[duckman]

Time to start an Ozito forum?!
Zelk

Perhaps we could start with a fan club and then see how it progresses?

[bennylaird]

I'm tempted. Has anyone had any success with this one? Apparently the bearings and bushes don't wear out to fast?


Actually I would consider one, what could go wrong?:confused:

[duckman]

I'm tempted. Has anyone had any success with this one? Apparently the bearings and bushes don't wear out to fast?


Actually I would consider one, what could go wrong?:confused:

Could be difficult to sharpen. I wouldn't jump in too quickly, not if I were you.

[bennylaird]

Does it count a a darkside tool? Doesn't eat electons?