Thanks: 0
Likes: 4
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 22 of 22
Thread: How to size used drills
-
9th July 2015, 05:52 PM #16Cba
- Join Date
- Aug 2007
- Location
- Melbourne
- Age
- 69
- Posts
- 1,417
I always measure at the very tip of the drill, right across the ends of the flutes with a vernier caliper. That is what matters most for the bore diameter.
Some of those drill shafts look pretty scored. Shafts are soft enough to be cleaned up in the lathe, just take a light cut across the shaft.
-
9th July 2015, 06:36 PM #17Senior Member
- Join Date
- Oct 2008
- Location
- blackburn vic
- Posts
- 221
Drill Sizes
Hi Dale
Dont know if you have one but here is a list of drill sizes that I made a few years ago.
Roger
-
9th July 2015, 10:54 PM #18Member
- Join Date
- Jul 2014
- Location
- eindhoven the netherlands
- Posts
- 83
-
10th July 2015, 09:48 AM #19
I thought the conversion factor between CM and Inch was 25.4 so why are we using 25.2 in this case? I'm not suggesting its wrong just want to understand.
Pity the Hare & Forbe EOFY sale has just passed
Is there anyone still producing Drill Tills? Especially a metric one as these don't seem to come up second hand.…..Live a Quiet Life & Work with your Hands
-
10th July 2015, 11:20 AM #20.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 24,746
-
10th July 2015, 01:53 PM #21GOLD MEMBER
- Join Date
- Nov 2012
- Location
- SE Melb
- Age
- 65
- Posts
- 1,238
There are 64 divisions in 25.4 mm (1"), therefore there are 64/25.4 = 2.52 divisions in each mm. If you multiply that by the length in mm, you will get the measurement in 64th of an inch.
-
10th July 2015, 04:33 PM #22
OK now that you explain it, it makes perfect sense
…..Live a Quiet Life & Work with your Hands
Similar Threads
-
Rangehood size vs. hotplate size
By Reno RSS Feed in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 0Last Post: 18th February 2009, 12:20 AM