![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 16 to 25 of 25
Thread: Extending a deck post
-
19th September 2023, 11:44 AM #16
Replace the posts with 100 x 100 x 6 SHS from footing to new roof pitching beam
The person who never made a mistake never made anything
Cheers
Ray
-
19th September 2023, 12:06 PM #17
New Member
- Join Date
- Jan 2015
- Location
- Bardon
- Posts
- 8
Hi 419
Having understanding still doesn't negate doing a bodgie job. I would be the first to put my hand up for doing bodgie jobs, however only in situations where it doesn't really matter. Thing is I want to put a roof over this part of the deck to avoid ongoing future maintenance or at least lessen it to a degree hence I would be looking to do a good job and probably have most of the required skills to do it well, the best thing is that I have plenty of time whilst I am still relatively young.
I think I said before that I am reticent about the steel timber combination and once encasing a timber beam in what I think you are saying is essentially RHS then no I probably wouldn't go down this path. If I was going to do anything like you said I would just cut the post down to top of the bearer and have a mob like Brisbane posts and Beams fabricate me some still RHS posts with a bolt on section to fit over the top of the post and deck bearer and the same at the top, however I have one problem WIFE don't think she would like the steel post option i.e. would like to see it kept in character a bit.
Thanks for the reply all food for thought.
-
19th September 2023, 02:19 PM #18
New Member
- Join Date
- Jan 2015
- Location
- Bardon
- Posts
- 8
Hi rwbuild
Had thought of this as an option. 2 problems as I have already said WIFE relating to the aesthetics. Second problem is I would need to redo the footing as it is currently a Pryda high wind stirrup(Actually not Pryda can't remember the brand as I put stainless steel ones here as is is right next to a saltwater pool) 600x100 M12 in a very deep footing as recommended by the engineer for the pool can't remember this size/depth exactly. That's apart from all the extra work needed to replace it as mentioned. I know I can get lengths of 100x100 hardwood and replace the whole thing which is what I am leaning towards after everybody's help so far. Unless there is something else that people think the QBCC will find acceptable without replacing the whole post.
-
19th September 2023, 02:51 PM #19
The current posts are probably notched in places. It might be difficult to accommodate that in a steel post.
-
19th September 2023, 03:47 PM #20
Replace with full height Hwd
The person who never made a mistake never made anything
Cheers
Ray
-
19th September 2023, 04:54 PM #21
New Member
- Join Date
- Jan 2015
- Location
- Bardon
- Posts
- 8
Yep think so. My poor back is aching at the thought.
Cheers everyone.
P.S. I was just looking at the QBCC site for Owner builders licence/permit and realised I need to also get a white card. Why did I let that lapse looks like another $40 for pointless crap. Note to everyone including myself keep you qualification up to date even if retired.
-
19th September 2023, 07:17 PM #22
GOLD MEMBER
- Join Date
- Nov 2007
- Location
- melbourne australia
- Posts
- 287
“Thing is I want to put a roof over this part of the deck to avoid ongoing future maintenance..”
I get it, I have to oil my exposed deck every 3-4 years. It’s a PITA. BUT that’s a lot less work than what you are proposing. If maintenance is the only reason, maybe just accept it?
-
20th September 2023, 03:25 PM #23
New Member
- Join Date
- Jan 2015
- Location
- Bardon
- Posts
- 8
Hey Jack
Not sure where you live or what deck oil you use but my deck needs oiling at least every year. Thats not to mention painting all the other bits and some of the timber just simply falling apart due to dry rot, fungal attack etc. The weather in QLD can be brutal on timber work.
I have lived in this house for about 12 years and already replaced all the decking on the exposed section as well as the joists at the same time and some of it is already looking again. Have also replaced most of the balustrading at various times. The covered part I have not done a single thing to except paint.
Let's not even get into the joys of owning a Queenslander. I always say buying a Queenslander is like getting married you fall in love, have a honeymoon period, things start to go wrong, and then things start to cost lots of money, this is when you start looking at all those brand new young modern houses and start dreaming. Hmmm my mind seemed to wander off track for a minute there. But hey just like my beautiful wife she's an oldie but a goodie.
Cheers thanks for the input much appreciated.
Thanks interesting the forum bot edited out the word chite but with an s. Go figure????
-
20th September 2023, 05:55 PM #24
Member
- Join Date
- Jun 2010
- Location
- SW Victoria
- Posts
- 52
As I said earlier, bracing is king. Thinking about the addition being described, it can be placed on top of the existing posts as long as there is adequate structural bracing and tie-down. Just like a structure placed directly onto a slab at ground level, the bracing and tie-down are the only things that keeps it upright. But if the posts are intended/required to form part of the overall bracing design, they will need to replaced from ground level through to the upper level roof
-
31st October 2023, 01:56 PM #25
New Member
- Join Date
- Sep 2018
- Location
- Brisbane
- Posts
- 8
This really needs pictures of what exists. There are usually a number of possible solutions, whether you do it yourself or at least use the information in your discussions with the person doing it.
Take a heap of photos and post them so people aren't second guessing your setup via your description. It'll also assist in not giving you solutions that go against the aesthetic of your current deck.
Similar Threads
-
extending a deck
By thejup in forum DECKINGReplies: 1Last Post: 3rd November 2007, 06:46 AM -
extending brickwork
By scottyb in forum BRICKWORKReplies: 4Last Post: 20th August 2007, 10:12 PM