Thanks: 4
Likes: 1
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 30 of 62
Thread: Blacksmith supplies
-
26th September 2014, 02:47 PM #16Senior Member
- Join Date
- Dec 2009
- Location
- Sydney
- Posts
- 249
Had a more proper look and Waterside also do new leg-vices and coke.
A.'Waratah' spring hammer by Hands & Scott c.1911- 20, 'Duffy, Todd & Williams' spring hammer c.1920, Premo lathe- 1953, Premo filing machine.
-
26th September 2014, 03:23 PM #17Intermediate Member
- Join Date
- Mar 2011
- Location
- Bangkok Thailand
- Posts
- 42
tools from GS
I bought these from Glen at GS Tongs. Great tools, really fast service. Highly recommend.
http://www.gstongs.com/
Neil
HPIM0751.jpgYou can't get something for nothing!
-
6th October 2014, 04:54 PM #18Member
- Join Date
- Jan 2012
- Location
- Pomona Qld
- Posts
- 51
Heads up for Anvil Seekers in Australia
I've been chasing up an anvil and finally got an answer from a guy in the ACT, "Valley Forge " the advertise a couple anvils 100kg and 200kg, just to let anyone know if they are chasing them up that they are no longer available from them as from now and into the foreseeable future, the email says he will alter the web site to now reflect these changes.
-
7th October 2014, 09:15 PM #19
http://www.gumtree.com.au/s-ad/adela...ier/1057396352
See above SA anvil manufacturer, has 75, 100 and 150 k new anvils made in Australia. THe price is very reasonable considering some poor sod just paid 1200 on ebay for an old beaten up BK sydney 160 lb anvil. That is 70 k, barely adequate for general blacksmithing.
At this point it seems that it is either this guy in SA, that is advertising on Gumtree, or http://watersidemetalart.org/
or http://www.ernst-refflinghaus.de/amboss.html
I have fancied a refflinghaus for a while now. Really want a southern german pattern with the side shelf and the smooth transition from square to round.
The prices directly from the manufacturer are much better than the US rep, and the shipping fees are very low too. I am working on lowering the fees at our end that as usual are a bit of a rip off, and I may have a deal for a number 58/ 100 kg.
I'll let you know how I go.“We often contradict an opinion for no other reason
than that we do not like the tone in which it is expressed.”
Friedrich Nietzsche
-
7th October 2014, 10:27 PM #20
The SA guy from gumtree has his anvils in Bendigo VIC
…..Live a Quiet Life & Work with your Hands
-
7th October 2014, 11:49 PM #21
I bought his hammers (2), punches (3) and a range of tongs a couple of years back. Great service and very nice tools.
-
8th October 2014, 12:14 AM #22Member
- Join Date
- Jan 2012
- Location
- Pomona Qld
- Posts
- 51
I'd be interested to see the final costs, what are the ones like on the Mont de Lancy site, ? http://www.blacksmithing.com.au/forsale.html
-
8th October 2014, 07:28 AM #23
So far Mr Refflinhaus has quoted me 1200 euros in Sydney CFI. I have yet to figure out what his agent will charge for release in sydney port. I have my own fright forwarder so may be able to strike a deal. Will let you know but likely some $200 on top.
“We often contradict an opinion for no other reason
than that we do not like the tone in which it is expressed.”
Friedrich Nietzsche
-
8th October 2014, 07:28 AM #24
I've heard 3rd hand Oscars @ Mont de Lancey are a bit soft.
…..Live a Quiet Life & Work with your Hands
-
8th October 2014, 07:44 PM #25
I spoke to the manufacturer that advertises on Gumtree, and he said his are 51hrc, manufactured in Victoria and hardened in SA.
Made of 4140 steel.
He can cast in 5160 and can do up to 61 hrc but did not give the additional cost.
i am not experienced enough in metallurgy to direct an anvil manufacturer to change his steel to suit extra hardness.
I rather go for a brand that was tested by time.
Refflinghaus does them up to 59 and one inch deep penetration.“We often contradict an opinion for no other reason
than that we do not like the tone in which it is expressed.”
Friedrich Nietzsche
-
8th October 2014, 09:55 PM #26
-
8th October 2014, 10:09 PM #27
-
8th October 2014, 10:12 PM #28
Then there is Kohlswa of course, their prices are even higher than Refflinhaus. They do however have a very large selection of shapes
http://www.kohlswagjuteri.se/branche...her-smidesstad
Prices:
http://www.kohlswagjuteri.se/pdf/pricelist_anvils.pdf
I like their C51 shape and it seems to be better priced, slightly.“We often contradict an opinion for no other reason
than that we do not like the tone in which it is expressed.”
Friedrich Nietzsche
-
9th October 2014, 10:58 AM #29Member
- Join Date
- Jan 2012
- Location
- Pomona Qld
- Posts
- 51
-
9th October 2014, 12:47 PM #30
I wish this was in Melb.
http://www.gumtree.com.au/s-ad/forre...ols/1058192757
This is the Adelaide bloke he has 150-100-75-50KG
http://www.gumtree.com.au/s-ad/adela...ier/1057396721
I have for sale 10 150kg Blacksmith/farrier anvils in a south german pattern, They are cast 4140 chromium molybdenum based steel, Through hardned to 52 HRC and the face and horns tempered to provide outstanding impact resistance and hardness.
Anvils come in finished state, machined and painted. Anvils stands can be provided for each anvil weight at an extra cost.
Anvils are in based in Bendigo so shipping is calculated from there.
Basic specifications of the anvil are as follows:
Face 135mm
Total Length: 813mm
305mm
Foot LxW:330mm
Hardy hole: 25mm
Pritchel hole: 10mm…..Live a Quiet Life & Work with your Hands