Thanks: 3
Likes: 10
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 30 of 36
Thread: Coffin Toother.
-
29th July 2014, 10:10 PM #16Deceased
- Join Date
- May 2008
- Location
- Australia
- Posts
- 2,306
-
5th August 2014, 10:02 AM #17Deceased
- Join Date
- May 2008
- Location
- Australia
- Posts
- 2,306
This toothing plane has been sold.
Stewie;
-
5th August 2014, 11:01 AM #18Senior Member
- Join Date
- Jun 2007
- Location
- Queanbeyan NSW
- Posts
- 212
Strike Knob
First year High School in Scotland - 1960
To loosen the plane blade you will not strike sharply in line with the blade as you will damage the plane and I will damage you. We compromise by striking down on the toe or in line at the rear. 45 degree bed.
You have the perfect spot for a strike button. No compromise.
Neil
-
5th August 2014, 04:07 PM #19Deceased
- Join Date
- May 2008
- Location
- Australia
- Posts
- 2,306
-
5th August 2014, 09:34 PM #20Senior Member
- Join Date
- Jun 2007
- Location
- Queanbeyan NSW
- Posts
- 212
-
5th August 2014, 11:20 PM #21Deceased
- Join Date
- May 2008
- Location
- Australia
- Posts
- 2,306
-
6th August 2014, 12:04 AM #22GOLD MEMBER
- Join Date
- Mar 2008
- Location
- Townsville, Nth Qld
- Posts
- 3,342
Small world ! My grandmother Elizabeth Devine came out on her own in 1911 from Carluke in Lanarkshire, Scotland.
regards,
Dengy
-
19th August 2014, 11:25 PM #23GOLD MEMBER
- Join Date
- Apr 2012
- Location
- Sydney
- Posts
- 1,488
Looks like LV have been busy.
http://www.leevalley.com/US/wood/pag...96&cat=51&ap=1
-
20th August 2014, 12:07 PM #24
How far up the blade does the toothing go?
Paul
-
20th August 2014, 01:12 PM #25Deceased
- Join Date
- May 2008
- Location
- Australia
- Posts
- 2,306
These BU Toothing Irons being offered are well suited to bench plane's with an adjustable mouth opening, as sold by LV & Veritas. By the time you fit the cap iron I have some reservations that these BU irons would work too well on a non adjustable bench plane due to a tighter throat clearance. The high profile depth of the cutting teeth especially on the coarse and medium irons concern me a little. The bed wall of the mouth opening is going to assist in the capture of the wood shavings between the gaps of each tooth fairly quickly.
Having built a BU Toothing Plane and then compared it to the performance of a BD, my preference is a BD, at or close to 90 degree bed.
My comments should be viewed as just a personal opinion on this subject of BU toothing irons.
regards; Stewie.
-
20th August 2014, 01:29 PM #26
-
20th August 2014, 05:35 PM #27
Looking at some of my old toothing irons, none of which look like the LV irons, the serrations appear to mostly be stamped in one at a time like a file maker chisels the teeth of a file.
Two Euro ? German possibly, blades I have, which were made ci 1980s look like the serrations were rolled up the blade, with some special tool made for the job.
Rob
-
20th August 2014, 11:32 PM #28GOLD MEMBER
- Join Date
- Apr 2012
- Location
- Sydney
- Posts
- 1,488
These guys have one too:
http://www.fine-tools.com/G301211.htm
-
20th August 2014, 11:59 PM #29Deceased
- Join Date
- May 2008
- Location
- Australia
- Posts
- 2,306
The tooth profile on the ECE toothing iron looks to be ideal for use on a high bed.
-
21st August 2014, 05:06 AM #30
thanks to all that hijacked planemakers thread with info on where to get toothing irons... I missed an ebay auction for a Sargent brand coffin toother which is a cow as I 'collect' Sargent planes. the ECE blade looks ideal. Again, thanks to all... will definitely get some toothing irons.