Page 2 of 2 FirstFirst 12
Results 16 to 19 of 19
  1. #16
    Join Date
    May 2003
    Location
    Central Coast, NSW
    Posts
    614

    Default

    Quote Originally Posted by _fly_ View Post
    I've sanded it back to almost smooth so hoping that the extra coats will level it out a bit when I have another go in the morning.
    ..
    Another tip is that when you've messed up and have a rough surface or an obvious flaw then you can use pullover to smooth it out. You put a mix of lacquer, thinners and meths in a jar, and use a rag or a rubber to flatten the surface. Just pull the wet rag across the surface. Adjust speed and wetness to get the surface melted and able to be pushed/pulled around. I think its generally better then sanding as less damage is done.

    Good for grain filling too.

    Arron
    Apologies for unnoticed autocomplete errors.

  2. #17
    Join Date
    Apr 2011
    Location
    Dandenong, Vic
    Posts
    0

    Default

    This has got to be the best thread in ages and I only had to ask the questions.
    Michael Parkinson watch out, here I come.

    Seeing today is a little bit cooler I am going to spray terps onto the spider webs all around the garage door.
    That way I can get used to what all the knobs do and work out what knobs affect (or is it effect) what.

    Thanks all for the fantastic advice given so freely.

    Peter

  3. #18
    Join Date
    Sep 2002
    Location
    Minbun, FNQ, Australia
    Age
    66
    Posts
    1

    Default

    Quote Originally Posted by _fly_ View Post
    ... I am going to spray terps onto the spider webs all around the garage door.....
    Use white vinegar instead, the cheap cleaning stuff, not so dangerous.
    Cliff.
    If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.

  4. #19
    Join Date
    Mar 2008
    Location
    Townsville, Nth Qld
    Posts
    102

    Default

    Great thread, thanks for sharing all your experiences and preferred methods
    regards,

    Dengy

Similar Threads

  1. where can i get nitrocellulose lacquer in vic
    By demetroy in forum FINISHING
    Replies: 2
    Last Post: 26th January 2013, 09:54 PM
  2. Nitrocellulose lacquer thinners
    By dai sensei in forum FINISHING
    Replies: 8
    Last Post: 26th August 2012, 04:20 PM
  3. nitrocellulose lacquer.
    By eisbaer in forum FINISHING
    Replies: 5
    Last Post: 14th September 2009, 08:09 PM
  4. Where to buy nitrocellulose lacquer?
    By riph in forum FINISHING
    Replies: 6
    Last Post: 24th March 2007, 02:14 PM
  5. Lacquer pulling Nitrocellulose
    By fanlee in forum FINISHING
    Replies: 4
    Last Post: 27th November 2006, 07:05 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •