Page 2 of 2 FirstFirst 12
Results 16 to 28 of 28
  1. #16
    Join Date
    Apr 2009
    Location
    sa
    Posts
    65

    Default

    I take your point. But I played with different quality hoses a bit and had no luck so I think you're final observation is about right: don't use garden hose for indoor water supplies.

    I had an underground black poly irrigation system in the front garden which was all buggered up. So I thought I'll make it accessible and I put a riser = black poly - and a tap at the top.

    Then I thought that's too far away so I ran garden hose from that tap to another tap I mounted on a frame closer to the action.

    Well that hose kept leaking. it would blow right off the tap fitting. It would split and leak. It would dribble water all the time at the tap fitting. And I saw how when I had it really strong fastened it would slowly slowly be swelling up larger and larger..

    So I gave up on garden hose and put an underground galv piple run in and riser to a tap.

    And that's the whole of my plumbing experience.

    Now it looks like I need to come to grips with blue stripe black poly and fittings. I think that's pretty pricey stuff, too. Hope I don't have to buy 100m just to get the run I want.


  2. #17
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    1,174

    Default

    Thin walled back poly is not intended for continuous water pressure either, but threaded or compression thick wall black poly can be used.

    In 1985 I built a laboratory at work that had to be as metal free as possible. A cyclone rated demountable 6 x 3m shell with ply lining was delivered to us and set up on blocks in a car park. It came with one copper connected tap, a PVC sink and waste connections, couple of power points and lights, but I gutted the lot and started from scratch. I rewired all the electrical - the two breaker box was replaced with a 20 breaker box (13 breakers- every lab hot plate had its own breaker). New plumbing consisted of 2 PVC sinks, and 3 taps in thick black poly. The PVC waste had to be replaced as it needed to be rerouted. I relined the internal walls, constructed the false air return walls and recirculating HEPA air filtration system, benches, fume hoods and acid distillation system, all in HDPE/Polypropylene/Polycarbonate. Testing showed the air inside this lab was as clean as a hospital operating theatre,

    When the time came for the Uni plumber to connect the water up he looked through the lab and said - not legal - both because of the materials used and the fact that I did not have a license. I said, - OK I'll strip it all out and you can come back and reinstall it

    Suddenly things weren't quite so illegal and he went around the lab pointing out a few small changes - like he didn't like our 2 plastic taps and made us change them for powder coated ones which cost $350 each!
    I installed the new taps and then replaced them with the plastic ones after he connected us. Even the plumber recognised that at worst if the system leaked, the water was just going to flow into the car park. The lab was supposed to be a temporary (5 year) operation as we were going to get fancy new labs in another building. However as usual it took 17 years to get the new labs so the lab was in continuous use up until then. No leaks. If I was to do it again I'd use the blue stripe stuff - don't remember it being available back then.

    When the old lab was finally replace in 2002 it was gutted and everything inside the lab went into a couple of skips and I score several items from the skips. The still brand new white powder coated goose necked tap, and the sign on the front of the lab.
    Now they are both in/on my shed

    sink2.jpg Sign2.jpg
    Last edited by BobL; 16th June 2023 at 09:04 AM.

  3. #18
    Join Date
    Apr 2009
    Location
    sa
    Posts
    65

    Default

    Inspiring story. Thanks for that. Enjoyed every bit of it.

    Listen I'm in comms with a guy at an irrigation store and he knows exactly what i want, he says, but he won't tell me or show me a picture until I give him the exact measurements of the garden tap and the sink flexy thing.
    Even though both of them are pretty standard in Aus.

    Do you think you could point me towards a description, maybe p;cs, of what I need to make these connections?

  4. #19
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    1,174

    Default

    Standard garden taps have a 20mm (3/4”) thread, the bigger chunkier ones are 25mm (1”)

    If your flexy thing is standard it will be 15mm (1/2”)connection

  5. #20
    Join Date
    Apr 2018
    Location
    Nsw
    Age
    64
    Posts
    558

    Default

    Quote Originally Posted by abrogard View Post
    Well that sounds pretty great to me. No 'ifs' and 'buts' - just blue line irrigation will do the job.

    And fittings are available for each end of it to connect to the two different taps - or the T piece at one end if I put that in?
    Every type of fitting and option is readily available including threaded connectors for brass or galvanised fittings so will easily join up to your existing water source and to a tap fitting
    Plumbers use this product often

  6. #21
    Join Date
    Apr 2009
    Location
    sa
    Posts
    65

    Default

    what are they called? any place I can view a selection of them maybe?

    I found this place but their pics don't clue me in on what they do, how they do it, which I'd need (if any of them)

  7. #22
    Join Date
    Apr 2018
    Location
    Nsw
    Age
    64
    Posts
    558

    Default

    Quote Originally Posted by abrogard View Post
    what are they called? any place I can view a selection of them maybe?

    I found this place but their pics don't clue me in on what they do, how they do it, which I'd need (if any of them)
    3G Metric Compression - Philmac

    They are on the shelf at Bunnings or any plumbing supplier

  8. #23
    Join Date
    Apr 2009
    Location
    sa
    Posts
    65

    Default

    Thanks for that. An interesting story. Make it all come to life.

    I have another little question maybe not worth asking:

    any hints or wrinkles, dangers, advice, about putting the hole in the wall of the tin shed?

    I'm thinking there's nothing special. Just do it however you like. But thought I might ask.

    I can see there's maybe the possibility of cutting to a size to take available grommets?

    Or perhaps cutting so's you get 'spikes' of tin project outwards and lay along the pipe make a better connection - easier to make waterproof, draughtproof?

    Nothing, I imagine. But just thought i'd ask while I"m here.

  9. #24
    Join Date
    Apr 2018
    Location
    Nsw
    Age
    64
    Posts
    558

    Default

    You can pretty up the hole with grommets etc to look nice and perhaps keep out vermin
    The poly pipe is extremely resilient and the sharp edges won’t worry it at all if you don’t

  10. #25
    Join Date
    May 2012
    Location
    Woodstock (Cowra)
    Age
    75
    Posts
    832

    Default

    Cheap hole saw of the closest size to OD of waste pipe 54mm from memory and slow to moderate speed in a drill, remember to put a bead of silicon around the pipe on the inside of your shed when you finally fit the pipe
    The person who never made a mistake never made anything

    Cheers
    Ray

  11. #26
    Join Date
    Apr 2009
    Location
    sa
    Posts
    65

    Default

    That's a good one. Thanks for that.

    I just got a quote. For 25mm polypipe with elbows at 25mm too, of course. And they're $13 each.

    we need 21m of pipe and

    I'm thinking maybe I would be better with 20mm pipe and fittings, if they make it?

    The tap the water comes from is 20mm and the flexhose fitting it goes into is 20mm. Though went i sen the young fellow to get me an adapter he came back with a brass 20mm to 25mm.

    I don't know why.

    I assume there's a difference in threads somewhere along this chain that I don't know about. And that's what this 'adapter' is doing. Changing between the tap hread at 20mm and some other thread ( pipe thread ?) at 25mm. But why go to 25mm ? I wonder if there's any truth in any of that?

    But either way it seems silly to have 25mm pipe choked at each end. Not that there's much differenc in the price for my hob - about the same for 21m of 25mm as for 50m of 20mm ( which I have to buy because they don't cut up 20mm)

    I think. If I found the right stuff. I googled and found some black polypipe which it said has a blue stripe. But it might be entirely wrong for this job, I don't know.

    But there might be a significant difference in fittings costs.

  12. #27
    Join Date
    May 2012
    Location
    Woodstock (Cowra)
    Age
    75
    Posts
    832

    Default

    The blue strip denotes potable water use only, the green strip denotes non potable water ie: dam, bore, etc but is still ok to use for potable. If there is a irrigation supplier near you, see them for pipe and fittings, they will cut to required length or nearest metre. Also try one of the specialist plumbing suppliers ie: Reece, Tradelink, etc
    The person who never made a mistake never made anything

    Cheers
    Ray

  13. #28
    Join Date
    Apr 2009
    Location
    sa
    Posts
    65

    Default

    Hey thats good to know I was thinking it had more to do about pressure and ability to bear being out in the sun.

    Seems like really I could anything at all except garden hose?

    And perhaps the while poly we we see everywhere won't take the sun?

Similar Threads

  1. Help me with my Garden Shed
    By Reno RSS Feed in forum BRICKWORK, CONCRETING, PAVING, RENDERING, etc
    Replies: 0
    Last Post: 5th April 2009, 03:00 AM
  2. Replies: 16
    Last Post: 18th May 2007, 11:46 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •