Fat wheels for grinders.

[journeyman Mick]

Sea Dragon,
I note that Steve isn't on line at the moment so I'll try to explain. The jubilee clamp (hose clamp) is fastened around the shaft of the dresser in order to act as a guide. It's set to the deepest gouge in the wheel and rides against the edge of the toolrest. Assuming the toolrest is square to the wheel's shaft then dressing the wheel until the clamp rides hard against the entire face of the tool rest will ensure that the wheel is true.

Mick

[Cliff Rogers]

Thanks for the Greenies blokes.

[sea dragon]

Sea Dragon,
I note that Steve isn't on line at the moment so I'll try to explain. The jubilee clamp (hose clamp) is fastened around the shaft of the dresser in order to act as a guide. It's set to the deepest gouge in the wheel and rides against the edge of the toolrest. Assuming the toolrest is square to the wheel's shaft then dressing the wheel until the clamp rides hard against the entire face of the tool rest will ensure that the wheel is true.

Mick

Thanks, Mick. I actually understandthat. Much appreciated.

[scooter]

Steve,
I have genuinely read this three times and admit to being envious of the way in which Scooter, Cliff and Ian W ...

See that boys, Scooter with a capital S.

'Bout time I woz afforded that level of respect


Mick, description well supplied


Cheers................Sean

[Cliff Rogers]

.... Scooter with a capital S.

'Bout time I woz afforded that level of respect
.......

Wot are you on about? :confused:
You (with a capital "Y") called yourself that.

[scooter]

Fair Comment Cliff Rogers Timber Hoarder

Bloody Capitalists...

[rsser]

Hmm, my local tool supplies place wants a lot more for a star wheel dresser than a diamond one, and I think you need both. With rough treatment the diamond pointed thing will coarsen up the wheel but not much.

btw, if your wheel is still running out of round then maybe you need to look at the bushes or washer.

[bennylaird]

Looks useful Clifton, did you consider going for a rewind on the motor to compensate for the extra load induced due to surface drag of the rotating surface? Perhaps a change in value of the starter cap as well, you need to consider all this mate, don't want to create problems later?

[Cliff Rogers]

Only thing that needs rewinding around here is you Benjamin.

[bennylaird]

Click! Brrrrrrrrrrrrrrrrrrrrrrmmmmmmmmmm Click!

Looks useful Clifton, did you consider going for a rewind on the motor to compensate for the extra load induced due to surface drag of the rotating surface? Perhaps a change in value of the starter cap as well, you need to consider all this mate, don't want to create problems later?


Click! Brrrrrrrrrrrrrrrrrrrrrrmmmmmmmmmm Click!


Looks useful Clifton, did you consider going for a rewind on the motor to compensate for the extra load induced due to surface drag of the rotating surface? Perhaps a change in value of the starter cap as well, you need to consider all this mate, don't want to create problems later?

[Cliff Rogers]

Click! Brrrrrrrrrrrrrrrrrrrrrrmmmmmmmmmm SWAT!

[bennylaird]

Clunnnnnnk! Brrrrwwwwrrrrrrrrwwwrrrrrwwwwwrrrrrmmmmwwwmmmmmm Crunch!


Looooooooooooooooks ussssssefulllllllllll shhhhhhhhst l Cliftvvvvvvvvvvvvvvssssssssssson, did you conwonka winka er going for a rewind o drrrrrrrrrrr n the motor to compensate fcompensateor compensatethe extra load induced due to surface chugga chugga starter cap as well, you ........................................................................

[Cliff Rogers]

Clunnnnnnk! Brrrrwwwwrrrrrrrrwwwrrrrrwwwwwrrrrrmmmmwwwmmmmmm Crunch!

[bennylaird]

SSSShhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh

it?

[Ashore]

And not even FRY day.