Source of mushroom emergency stop button

**rsser** · 24th May 2009, 05:54 PM

Ah, makes a little more sense to this electrically challenged woodturner. Thanks.

**Waldo** · 24th May 2009, 09:40 PM

G'day Ern,

Just had a chin wag with the neighbour over the fence, and give Ideal Electrical a go.

**rsser** · 24th May 2009, 10:03 PM

Thanks Waldo.

**rsser** · 23rd June 2009, 03:14 PM

This is what I ended up ordering:

http://www.mcjing.com.au/searchresul...keyword=FPS-01

$50.

**Waldo** · 23rd June 2009, 03:16 PM

at a good price too I reckon.

**rsser** · 23rd June 2009, 03:29 PM

Won't be industrial grade but then hopefully it won't get repeated use! Thanks for all the help and advice in this thread.

**Waldo** · 23rd June 2009, 03:31 PM

It'll do the job so

**rsser** · 24th June 2009, 11:12 AM

Hmm, turns out not to be a toggle switch. Power only flows when it's depressed. Thought I'd sorted this issue with McJing on the phone.

**Waldo** · 24th June 2009, 11:21 AM

Bugger.

**Keith_W** · 25th June 2009, 07:15 AM

Rsser,
You could modify your machine circuit to accomodate the foot switch you have if it has a NC (normally closed contact) by placing a small control relay in the circuit where the latching contact is wired in series with the NC of the foot switch.
If this is an option for you I can draw up a simple circuit to show you.
Regards,
Keith.

**rsser** · 25th June 2009, 07:59 AM

Thanks for the offer Keith. But it's probably safer all round if I don't mess with electrical stuff.

**rsser** · 8th August 2009, 03:21 PM

Finally got it sorted.

Rang a number of places but theirs was like the McJing and needed wiring to boot.

Finally got one of these from PWS.

With a fat RE magnet on the back it sits on a range of surfaces. Only wrinkle is that one lead exits the back. Some cutting, drilling and terminal crimping will be needed.

BTW anyone who is looking for Moeller switches should go to the wholesalers; one of them is in Thomastown, VIC. They sell for a fat discount over RRP.

**pellcorp** · 7th September 2009, 08:09 AM

Did you purchase the "ProRouter Switch (standard)" or the "ProRouter Switch (deluxe model)"?

I am interested to purchase one of these, but would like to avoid the either of the leads exiting the back, as that would make it more difficult to mount.

**rsser** · 8th September 2009, 08:35 AM

The standard.

Yeah, rear exit would be OK if you're prepared to drill a plug sized hole in the mounting surface. Otherwise it's a pill

**robyn2839** · 9th September 2009, 12:05 AM

PUSH BUTTON SWITCH tend T2BKR1C-Emergency Stop Switch

found this on ebay $5.50 ,plus some others ,typed (emergency stop switch)...bob

Thread: Source of mushroom emergency stop button

Thread Tools

Search Thread

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions