![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 16 to 16 of 16
Thread: Hammer a3-31 planner thicknesser
-
2nd December 2010, 05:44 PM #16
Had the camera to hand, so I snapped the method I use to keep the dusty hose out of the way when in thicknessing mode on my JPT-310.
The black adapter at the end of the hose is a Carbatec push on rubber thingy, which holds the pipe in place better than just pushing it onto the dust hood.
Pipe is held out of the way by a loop of stretchy garden tie material (which stays on the hose) and can just be hooked over the jointer tables when required.
Cost of this precision hose alignment accessory is approx. $0.05.......
Similar Threads
-
Thicknesser/Planner anyone?
By 4Him24_7 in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 1Last Post: 14th April 2009, 10:13 AM