![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 16 to 24 of 24
-
20th April 2007, 04:09 PM #16
Senior Member
- Join Date
- May 2006
- Location
- Sydney
- Age
- 40
- Posts
- 115
does your friend work in sydney? if so, wanna pm me his details?
-
20th April 2007, 04:11 PM #17
Senior Member
- Join Date
- May 2006
- Location
- Sydney
- Age
- 40
- Posts
- 115
-
20th April 2007, 04:15 PM #18
You're gonna need a big step ladder to get to anything higher than 2.4mtrs.
I know not with what weapons World War III will be fought, but World War IV will be fought with sticks and stones.
Albert Einstein
-
20th April 2007, 06:11 PM #19
Senior Member
- Join Date
- May 2006
- Location
- Sydney
- Age
- 40
- Posts
- 115
eh, it will be the same step ladder i will need to change the light bulbs i guess
I think that space would be useful for bulky seasonal things like blankets and races hats and ski jackets etc etc
-
20th April 2007, 10:03 PM #20
Sort of. I'm not familiar with the wardrobes market. A cabinet maker might be more expensive than pre-built products, though. Or might not. It'd be worth a chat, at least.
As you're considering the upper part for auxiliary storage, a secondary (pre-built) cabinet might be better anyway. Subject to your esthetic objectives, of course.
JoeOf course truth is stranger than fiction.
Fiction has to make sense. - Mark Twain
-
21st April 2007, 12:08 AM #21
Senior Member
- Join Date
- Mar 2004
- Location
- Melbourne
- Age
- 58
- Posts
- 86
what you use is a 9mm peice of MDF for the backs then glue strips of 12mm MDF to that to form the style of door you want. This gives a total thickness of 21mm which is OK for doors.
Have made many like that in the past, tyhe talest was about 3000mm in height, and you can get MDF and melamine boards upto 1800 *3600mm in size.
To get the height of the wardrobe you want you can make a base cabinet 2400mm high then add a secondary cabinet on top of that to get your desired height. Just use a solid continuous peice for the visable end.
-
21st April 2007, 08:47 AM #22
tall robe doors are no problem ,depending on the style they can be made any height ,they can also be machined from a single sheet of 18 mm MDF to look like 5 peice doors ,for extra height you only have to increase the number of hinges used to hold the added weight ,we have done many of this style over the years both here and in brisbane and have had no problems with them
-
6th May 2007, 10:26 AM #23
no offence intended to anyone but I am concerned about the aesthetics of those high doors ..... I just don't think they look good in the OP's photograph. I CAN imagine for example, mirror finish red doors with fine aluminium frames looking great that height (for an upmarket, ultra-modern look of course) but again, (for me only I spose) NOT going all the way to the ceiling - even a 150mm bulkhead helps keep such things feeling 'light' in my opinion
have funSteve
Kilmore (Melbourne-ish)
Australia
....catchy phrase here
-
6th May 2007, 10:53 PM #24
Here is photo of ours these are 2.3m, I agree that you need some amount of bulkhead. Our front rooms have 2.7 metre ceilings with the same style door to 2.6m, these wardrobes are four doors long though. I think if you go to high without having the length it can look wierd. These doors are great and I would never go back to hinged wardrobe doors. They are very easy to fit. Surprisingly the white is more expensive that the mirror (by about $50 per door in our case). They are made out of vinal backed glass.
Last edited by Burnsy; 6th May 2007 at 10:54 PM. Reason: spelling
Similar Threads
-
bi-fold doors
By pawnhead in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 32Last Post: 13th November 2007, 11:15 PM -
re-juvinating hand carved doors
By Tricky Dicky in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETCReplies: 1Last Post: 11th March 2007, 01:24 AM -
Restoring Carved doors
By Tricky Dicky in forum FINISHINGReplies: 0Last Post: 2nd February 2007, 03:09 PM