Thanks: 1
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 16 of 16
-
22nd September 2016, 11:38 PM #16Senior Member
- Join Date
- Jun 2009
- Location
- Paynesville
- Posts
- 119
In addition to the cutters I also highly recommend that you get some retaining screws. I sheared the head off three when I rotated my cutters. The screws had seized in the thread on the drum. I managed to get them out okay (drill & ezi out) but it was a tedious task & you need a drill bit that can handle the hi-tensile steel.