Page 14 of 30 FirstFirst ... 491011121314151617181924 ... LastLast
Results 196 to 210 of 443
  1. #196
    Join Date
    Dec 2006
    Location
    East of Melbourne Aus.
    Age
    73
    Posts
    166

    Default

    Next week is about sharpening everything.
    I am learning, slowley.

  2. #197
    Join Date
    Aug 2006
    Location
    Canberra - West Belco
    Age
    63
    Posts
    205

    Default

    Well not sure how the discussion ended up as I had to bow out to eat dinner, but here is the photo that i promised.

    P9190203.jpg

    The tower unit in the middle runs 24x7 and is a file server for everything, i brush the front and the side big fan when i see a build up but the inside is surprising clean, the laptop is sort of temp and tends to be where i need it, it's the one i use for chat sessions when i'm in the shed.
    The monitors are effectively protected from physical harm as they are at the back of the just high enough shelf spacing, this also seems to protect them from most dust.
    The networking bits on the top shelf are the unluckiest as dust settles there quite well.

    Lessons for when i redo the corner.
    Build everything into at least top and side enclosed shelving.
    Curtain style front covering will help in limiting dust.
    Dust really isn't a huge issue.
    Cheap keyboard/mouse combo's from officeworks are worth it.

    If you must have a PC for any reason just make sure it's safe on a shelf and don't have dust blowing directly on it

    Cheers
    PHil

  3. #198
    Join Date
    May 2010
    Location
    Not far enough away from Melbourne
    Posts
    1,384

    Default

    My new shed computer has arrived.

    shed computer.jpg
    I got sick of sitting around doing nothing - so I took up meditation.

  4. #199
    Join Date
    Aug 2016
    Location
    Brisbane
    Age
    57
    Posts
    80

    Default

    I'm amazed that some of you have so little dust that you would even contemplate have a computer with a fan in there. I'm also sadly reminded how poor my dust management in the shed is, that I would be amazed at this prospect.
    My YouTube channel: https://youtu.be/2_KPRN6I9SE

  5. #200
    Join Date
    Dec 2013
    Location
    Mt Waverley Vic 3149
    Age
    81
    Posts
    199

    Default

    Quote Originally Posted by Pagie View Post
    Next week is about sharpening everything.
    I just found out that there is a sub - forum devoted to sharpening https://www.woodworkforums.com/f127.
    Might be worth looking at before Sunday's Jabber

    Cheers
    Bob

  6. #201
    Join Date
    Nov 2011
    Location
    Melbourne
    Posts
    1,184

    Default

    Sunday is hear again the end of the Week.

    That means Sunday Night Jabber is yet once again.

    All welcome, if your a member on this fine forum your welcome to join us.
    It is a BYO gathering.

    Tonight’s hot to trot subject matter(Not that we stick to it,but we do try)
    Drum roll Please, its everything to do with sharping,generally a subject that most Wood workers can get quite passionate about,as there are as many ways to sharpen a edge tool as there are religions.
    So please keep that in mind this evening.

    Start Time 7.30 ish AEST
    That means those in Melbourne, Victoria ,Australia Earth ,we start at 7,30 Pm ish time, for those who live elsewhere ,I’m sure you can work out what time to join us because I can’t due to my forum name.

    The Get together is held using Skype,you are able to join in by just joining as a Guest.

    Https://join.skype.com/u73k1kv4B1UL


    See Ya 7.30 ish Matt


    Sent from my iPad using Tapatalk Pro

  7. #202
    Join Date
    May 2010
    Location
    Not far enough away from Melbourne
    Posts
    1,384

    Default

    Quote Originally Posted by Simplicity View Post
    its everything to do with sharping,generally a subject that most Wood workers can get quite passionate about,as there are as many ways to sharpen a edge tool as there are religions.
    Sometime during the evening's program, I will switch to a live broadcast from the shed to demonstrate some very effective techniques for accurately grinding and honing bevels, straight and skewed.

    This is of course subject to technology working as it should (Video and audio provided by Jools and her "trusty" I-thing)
    I got sick of sitting around doing nothing - so I took up meditation.

  8. #203
    Join Date
    Nov 2011
    Location
    Melbourne
    Posts
    1,184

    Default

    Last nights chat we had Doug give us a demonstration using is 2/48 inch (For those that won’t accept ) belt grinder for establishing a primary bevel of a Chisel.
    We also had the pleasure of some fresh meat,thanks to Shane hope we didn’t freak you out to much.

    We kept working on Bob,to give away his idea of using All thread to mark out a saw for re toothing instead of a paper template, before we fell into trying to work out policies regarding the ruling metric system over the antiquated imperial thingy to cool down the French issue.

    Cheers Matt.
    O an of course Chainsaws had to be mentioned.

  9. #204
    Join Date
    Dec 2006
    Location
    East of Melbourne Aus.
    Age
    73
    Posts
    166

    Default

    And don't forget JC's great camera work. The lighting was a bit basic but very good for a first try. Next time it will be better I'm sure. The Idea we can show different methods of craft is good. Remember the people who make utube videos use lots of expensive gear to film.
    I am learning, slowley.

  10. #205
    Join Date
    Nov 2011
    Location
    Melbourne
    Posts
    1,184

    Default

    Quote Originally Posted by Pagie View Post
    And don't forget JC's great camera work. The lighting was a bit basic but very good for a first try. Next time it will be better I'm sure. The Idea we can show different methods of craft is good. Remember the people who make utube videos use lots of expensive gear to film.
    Actually some You tubers I’ve watched have filmed just using a Phone camera.

    But it would be great if other members wanted to follow Doug lead.

    Cheers Matt.

  11. #206
    Join Date
    May 2010
    Location
    Not far enough away from Melbourne
    Posts
    1,384

    Default

    Quote Originally Posted by Pagie View Post
    And don't forget JC's great camera work. The lighting was a bit basic but very good for a first try. Next time it will be better I'm sure. The Idea we can show different methods of craft is good. Remember the people who make utube videos use lots of expensive gear to film.
    It was never intended to be a polished Youtube performance. It was transmitted live without the chance to edit or review the quality. We just went out there and turned on the lights and got into it.

    I couldn't see the image that was getting broadcast so thanks for the feedback about the lights. I have a pair of LED worklights on a tripod that possibly could have made a big difference for next time. I also couldn't see the faces of the audience to get any visual feedback of whether the content was easily understood but from the comments everything was pretty clear.

    That belt grinder is one of the most-used tools in the shed, but pairing it with the Veritas Mk II honing guide on that jig I made sure makes plane blade and chisel grinding easy and accurate.
    I got sick of sitting around doing nothing - so I took up meditation.

  12. #207
    Join Date
    Dec 2006
    Location
    East of Melbourne Aus.
    Age
    73
    Posts
    166

    Default

    So what does a belt grinder like that cost?
    I am learning, slowley.

  13. #208
    Join Date
    May 2010
    Location
    Not far enough away from Melbourne
    Posts
    1,384

    Default

    Quote Originally Posted by Pagie View Post
    So what does a belt grinder like that cost?
    That one cost me about $3200 I think. You can get a single speed one for a fair bit less but you really need the variable speed particularly if using it on wood. If I was buying one now (nearly four years later) I would go for a different brand because there are a lot of new designs out there that will do a lot more.

    This is the one I would buy today. Shopmaster 72 Grinder - DELUXE Accessory Kit 2hp Variable Speed - Artisan Supplies
    I got sick of sitting around doing nothing - so I took up meditation.

  14. #209
    Join Date
    Nov 2011
    Location
    Melbourne
    Posts
    1,184

    Default

    Sunday is nearly hear again(kind off)the end of the Week.

    That means Sunday Night Jabber is very close again.
    Charge your glass,get the computer fired up.

    All welcome, if your a member on this fine forum your welcome to join us.
    It is a BYO gathering.

    Sundays war of words discussion will be on the ascetics of TOOLS.

    So are you Form over function,are you function over form, do you not give a Rats Bottom, are you a stout member of some secret communist state and feel we should all have Utilitarian tools.
    Or do you see Tools as ART.


    Start Time 7.30 ish AEST
    That means those in Melbourne, Victoria ,Australia Earth ,we start at 7,30 Pm ish time, for those who live elsewhere ,I’m sure you can work out what time to join us because I can’t due to my forum name.

    The Get together is held using Skype,you are able to join in by just joining as a Guest.

    Https://join.skype.com/u73k1kv4B1UL


    See Ya 7.30 ish Matt


    Sent from my iPad using Tapatalk Pro

  15. #210
    Join Date
    May 2010
    Location
    Not far enough away from Melbourne
    Posts
    1,384

    Default

    Quote Originally Posted by Simplicity View Post
    Start Time 7.30 ish AEST

    That means those in Melbourne, Victoria ,Australia Earth ,we start at 7,30 Pm ish time, for those who live elsewhere ,I’m sure you can work out what time to join us because I can’t due to my forum name.
    Matt, it may have slipped your mind but this Sunday is the day that Australia goes from three easy to understand timezones to five confusing ones.

    Did you mean 7.30 AEST or AEDST?

    This small detail might not affect a lot of us but Paul might have to come in from his shed an hour earlier.
    I got sick of sitting around doing nothing - so I took up meditation.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •