Bosch PBD 40 Bench drill

[BEM]

Bernmc,

My hub IS slightly off-centre, but that doesn't effect its operation. It's not pretty but I can live with it.

[barramonday]

I've been giving the poor little Bosch a hard time recently. Drilling dog holes through my new workbench tops made from 75mm thick reclaimed 80yr old blackbutt, Ironbark and other hardwoods.
Bosch drill press.jpg

[Tonyz]

Urgent urgent what would freight be from Perth to South Oz for one of these.
I can now be more open...I decided to do a Gumtree Australia wide search and this popped up in Carine and he is retiring and downsizing.
$20 not going to argue price but how to get it home for me.

He is willing to put on hold for 24 hours for me..... Advice help please.

[Midnight Man]

Urgent urgent what would freight be from Perth to South Oz for one of these.

Perth to "South Oz" doesn't give enough information for a price.

Here's what I would do:

(1) Check Amazon for box dimensions and weight - I found them to be ‎74.5 x 37.5 x 27.5 cm; 13.22 Kilograms
(2) Input that, including postcodes into e-go – Australia's Number 1 Low Cost Carrier and in seconds you will have your price.

Tip: $20 isn't going to cut it for shipping, I'm pretty sure.

[Tonyz]

holey toledo prices are all over the place and living where we do adds an obscene extra.
Ego Perth to Pt Lincoln $157
" Adelaide (daughter) $37
most freight are roughly same to Adelaide, Lincoln is a different story.

[jimbo16]

Jimbo and BEM, those hubs you've linked to have a 22mm ID. The bosch's spindle is 20mm. Are you just tolerating a slightly off-centre hub, or is there an option I'm missing?

Read further back in the thread. I address this issue in post #103

[Tonyz]

who is a happy chappy.
November sales last year $274 and took how long for delivery?

Gumtree $250 freight to Adel $37 and the kids are coming over next weekend

[Tonyz]

with this arriving in next few days I start thinking about tables and heights etc

1 I recently bought a drill press table with tracks, extending backboard etc, is it worth adding this to the Bosch table.

2 What is the distance between chuck and existing table? can/do you raise the table if needed or just bring the chuck down further?

3 some of you have changed the winding wheel while others have added steering wheel knobs thoughts ideas?

any other mods that have been done.

and to show my ignorance how do you gauge the drill speed for whatever job you are doing? I know when helping drill thick heavy steel to slow down but is there a table etc

[Potts]

Hi Tony, with this unit unit the whole motor assembly adjusts up and down rather than the table which acts as the base. I have made no change to the wheel, find it quite easy to use, particularly if you adjust the head height. I also just use the existing fence with some small jigs I use without any issues.
Keep in mind I use this unit for toy making so there is not to much to stress it, about the largest thing I have done was a 48 mm forstner hole, no issues.

[BEM]

Hi Tony,

One of the features is that you set the drill speed digitally. It's very easy to do. You can also set the depth the same way.

[BEM]

The Bosch Bench Drill PBD 40 is on sale on Amazon again. It's selling for $294.47 with free shipping. The sale is on for the next 8 days. Go crazy guys.

[jimbo16]

The Bosch Bench Drill PBD 40 is on sale on Amazon again. It's selling for $294.47 with free shipping. The sale is on for the next 8 days. Go crazy guys.

Back up to $432 now. It didn't last that long.
link to amazon price history on camel³

[BEM]

The BoschBenchDrillPBD40 is on sale on Amazon again. It's selling for $294.40 with free shipping for their annual Amazon Prime day sale (actually 2 days). Ends tomorrow at midnight.

[BEM]

The Bosch Bench Drill PB 40 is now $269 on Amazon till Midnight! Maybe with a free set of steak knives too!!!

[overcoat]

Just saw on OzBargain this is on Amazon at what appears to be a new record low of $204.58