Results 1 to 4 of 4
  1. #1
    Join Date
    Jan 2006
    Location
    Sydney, Northern Beaches
    Age
    78
    Posts
    0

    Default Repairing a Chewed Table

    Fascinated by discussions on sealers and stains...and learning a lot!

    Having just built my new shed and coming back to my old hobby after a long lay-off I realise that I need to study up.

    1. I have seen some beautiful woodwork that displays the grain and feels like silk to the touch. Where can I find some useful links about choosing finishes, application techniques and finishing?
    2. How the heck can you tell if shellac is on an item of furniture? Or for that matter how do you recognise any treatment. I have to repair nested coffee tables that the puppy chewed (serious damage to the legs and coross member). I suspect it's finished with shellac and that's mainly because it's about 1960 vintage, dark brown in colour and sands quickly to clear timber (a very soft white coloured timber, but definitely not pine).

    Help will be appreciated. (BTW pup in pic is not the culprit)
    dave
    nothing is so easy to do as when you figure out the impossible.

  2. #2
    Join Date
    Dec 2005
    Location
    South Australia
    Posts
    140

    Default

    I've got one of those four legged woodchipers as well, sounds like it is shellac is the dust almost crystline? It is most likely stained as well grab some dark stain and experiment on some scrap, when colour is ok finnish with shellac and polish or if it's not a restoration use polyurathane

  3. #3
    Join Date
    Jan 2006
    Location
    Sydney, Northern Beaches
    Age
    78
    Posts
    0

    Default

    Thanks China.

    I'm worried about sanding because it will necessarily reduce the profile of the legs and cross-member - spoiling the overall look of the item. But I think I have no choice here.


    Would it be feasible to remove the legs etc? How - given that it's probably glued and most likely M&T jointed. I may as well built entirely new tables (3 off) given the nature of the damage.
    dave
    nothing is so easy to do as when you figure out the impossible.

  4. #4
    Join Date
    Jan 2006
    Location
    Sydney, Northern Beaches
    Age
    78
    Posts
    0

    Default

    Followup- 3 years on. I easily knocked the tables down by gently breaking the tenon glue-joints. It proved to me that these tables must be very old. I used a bar-clamp with the faces reversed and gently applied pressure until the tenon slipped out of the mortise.

    I matched the wood by grain and texture to Merbau and carefully cut replacements to match the "bitten" pieces. Getting residual old glue out of the mortises was difficult without enlarging the opening, but was possible using my smallest chisel. I couldn't get to the bottom of the mortises but a very careful hand drilling resulted in more old glue popping out.

    The new bits were very carefully Black Japanned and then rubbed down quickly so that I could bring the colour back up to the antique appearance of the original parts.

    Altogether, quiet pleased with myself. BTW this was all completed about 1.5 years ago and little Tess is now 4 and never chews things any more. Good doggie.
    dave
    nothing is so easy to do as when you figure out the impossible.

Similar Threads

  1. Repairing an old iron bark table top
    By Eastie in forum FINISHING
    Replies: 2
    Last Post: 25th November 2002, 10:23 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •