![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
Thread: cutting expanded metal
-
14th June 2009, 09:20 PM #1
cutting expanded metal
I need to cut some flormesh, it's expanded metal. The cuts are 5mm thick and 14mm long. There will be about 400 cuts. I'm looking at hiring a 240v circular cold cut saw. Is this the best way to go? Is there anything to watch out for using this type of saw
Read the full thread at RenovateForum.com...