Gudday.
I am looking at dividing a double garage by putting a stud wall down the centre, Many years ago we had an extension built onto a timber framed house. The builder assembled the stud framing, top and bottom rails and noggins flat on the floor and then simply stood the framing up and nailed it to the next wall and floor.

The garage is block walled and concrete floor so, obviously i could not use this method with dynbolts to the floor and walls.

Would I have to set the dynabolts in the floor, then put the bottom rail in place and then fix the top rail to the trusses after cutting away the ceiling plasterboard. Then put the dynabolts in the end walls and fix the end studs followed by nailing the intermediate studs between the top and bottom rails or is there an easier way?

Bill


Read the full thread at RenovateForum.com...