G'Day to all from NSW

[Tez2]

G'Day all
Am from Northern Rivers area of NSW and interested in lotsa things to do with woodworking and metalworking.
Only found the forum this afternoon when looking for info on welding (Mig) gases ??? - on a woodworking forum................!!!!!!!!!!!!!!
Lots to looky see here and catch up on,
Tez2

[orificiam]

Welcome to the Forum Tez2 I'm sure you'll love it here'
Cheers Tony.

[munruben]

Hi and welcome. Lots to see and learn here.

[wheelinround]

Hi Tez2 welcome there is a woodies shed at Alstonville at the old House With No Steps up your way.

[Tez2]

Bugger, thats about 2 hours away - east from me - but good to know, thanks for the info there and for the welcome guys

[chippy 71]

Bugger, thats about 2 hours away - east from me - but good to know, thanks for the info there and for the welcome guys

Welcome Tez2, this is a great forum and there is always someone able to help.
You live in a great area but where the hell are you that you are 2hrs west of Alstonville?
Would that still be in Northern Rivers?

Colin ex Ilukan

[Tez2]

Colin, am at Bonalbo, and its fairly close to 2 hours west of Alstonville, its approx 1-1/2 hours from Lismore, but still in the Northern Rivers area though.

[chippy 71]

Colin, am at Bonalbo, and its fairly close to 2 hours west of Alstonville, its approx 1-1/2 hours from Lismore, but still in the Northern Rivers area though.

Yep.........I have to agree, you are still in the Northen Rivers.

I tend to forget just how big an area is covered.

Colin.

[Barry_White]

Colin, am at Bonalbo, and its fairly close to 2 hours west of Alstonville, its approx 1-1/2 hours from Lismore, but still in the Northern Rivers area though.

Welcome Tez

Bonalbo is nearly closer to the New England Tablelands. Pretty well just at the bottom of the hill.

[Ed Reiss]

Welcome to the asylum Tez2

[albasia_rudy]

G'day , Mate. I love woodworking & metalworking also. I used to have my own metalwork workshop before the Crude Oil price got crazy and I loss a lot.....What kind of info on MIG welding are you looking anyway ? I hope I can be any help. I'm from Indonesia , anyway...

[Tez2]

Thanks albasia_rudy
Have got the Mig gas info all sorted out, and was looking for disposable bottles for the amount of work i would need with gas use - little - use cored gasless wires otherwise.
I found a supplier here on the North Coast of NSW - on the coast - that sells the throw-away bottles and the regulators for them.

Tez2

[albasia_rudy]

Glad to hear that. be careful in this forum.......beside expert on woodworks , these guys are seriously funny.....I mean it. My brain often get a blurp many times by them.....