![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
-
28th April 2009, 10:30 PM #1
How to Smooth Rough Interior Walls?
My interior walls have a very rough finish, it is quite an old house (built in 1960). The previous owner has painted the walls with a sickly brown but I can still see a very rough surface. How can I create a smooth wall surface for my walls? Would I coat it with plaster or something and then sand it down? It is sort of like rough sandpaper but not gritty. It seems to be a board like hardboard or something?
Here are some pictures to show the roughness, it's even rougher than it looks in these pics (click the links to see full size pics and see closer up of roughness etc):
Close up:
full size pic here: http://homedeals.info/blog/wp-conten...oseup-wall.jpg
same but with different lighting:
full size pic here: http://homedeals.info/blog/wp-conten...seup-wall2.jpg
I would also like to do something with the horrible wall diverders (I'm not sure of the proper name, maybe skirting?) . But I was thinking maybe I could just place board in between these dividers so I could make all the wals flat and smooth. Here is some pics to show you how ugly it looks:
Pic of walls near front door:
full size pic here: http://homedeals.info/blog/wp-conten...-dividers1.jpg
Wider angle:
full size pic here: http://homedeals.info/blog/wp-conten...-dividers2.jpg
Here is a quick mock up in photoshop on how I would like the wall to look (without dividers)
full size pic here: http://homedeals.info/blog/wp-conten...t-dividers.jpg
Read the full thread at RenovateForum.com...
Similar Threads
-
How to level /smooth plaster walls?
By chromis in forum PLASTERINGReplies: 8Last Post: 6th March 2008, 04:46 PM -
Interior walls?
By FirstTimer in forum PLASTERINGReplies: 6Last Post: 21st May 2007, 07:18 PM