Page 2 of 2 FirstFirst 12
Results 16 to 19 of 19
  1. #16
    Join Date
    Nov 2006
    Location
    t
    Posts
    79

    Default

    The stick idea is an immeadiate fix, will stop the leak until you can get something more permanent, used it a few times myself.

    Another quick fix is a lump of clay (bentonite) put inside, not good to swim in drinking water tanks but it worked on bore water tanks OK..
    .

  2. #17
    Join Date
    Feb 2008
    Location
    Deloraine Tasmania
    Age
    59
    Posts
    0

    Default

    The tank is too small to render or that would be an option, its only a header tank. I tried plugging the hole with the selleys putty but the pressure was too great, also 2 more holes opened up while i was messing round with it. So i think its a new tank for sure.
    Thanks everyone for your advice.

  3. #18
    Join Date
    Apr 2009
    Location
    riverlands
    Posts
    2

    Default Leaky Tank Problem

    I have a few tank problems. One is easy, I just need to replace a tap.

    The one that is being a headache, has what appear to be multiple small leaks across the area where there is a diamond shaped piece of metal that the tap in the water tank comes out of at the bottom of the tank (a common enough area for leaks to appear). .

    This tank HAS been repaired before. However when the last owner inherited the house it from his dad, he didn't really live there full time (just as a weekender) so when he had some tanks die, he did not repair them. As long as he had at least one 18,000+ litre tank (and the very slightly saline bore) he didn't really care.

    We (on the other hand) want our water back.

    So, I went ahead and got rid of the old sealant, leaving the tank disconnected from the others. I had already used a small amount of bore water to see where the leaks were so I was well prepared. I also took a very mild brass metal brush and went over the surface a little bit, just to be certain that ALL the old sealant was gone. Then I went to the hardware store (out here in "rain water only" land) and told them the condition of the tank and asked which sealant to use. They then sold me a clear silicone sealant: flexi-seal pro-seal, industrial grade, clear

    I got home and cleaned the area well with meth-spirits to be sure there were no oils or other residue there. Then I let the February heat take off all the spirits for a whole day. The next day, mid-morning when the tank was dry and warm, I went out and VERY cautiously and slowly started to apply the sealant from the caulking gun, smoothing firmly it into every last variation of the surface by using a disposable paint brush for maximum penetration into every little surface variation. I wanted to be very sure that what I put onto the tank would stay there and match the metal perfectly.

    After the first layer of sealant was there and as perfect as possible, I waited about 6 hours and added more. The next day I added more again in the late afternoon. After all my layers of sealant were good enough (in my estimation) I had a very nice looking even seal, and I THEN waited a week for the whole patch job to dry safely in the heat for several days.

    A week later I chanced a test, by putting in a meter and a half of bore water (the tank is 3 meters across) . NOT ONE DROP LEAKED!!!. This seemed great, so I added a bit more water to see how it would deal with more pressure, and still not a leak. I left the water there for SEVERAL weeks (it nerver lost a drop) before I drained out the bore water and hooked that tank into the rest of the water tank system and transfered in soime rain water.

    NOT A LEAK... UNTIL

    Then yesterday we finally got our very first rain. I chose to have a look before it got too dark outside (if there had ben a problem), and I saw a problem.



    Water had started to well up and forward along the tap pipe that comes out of the tank. I felt arounjd and it was obvious there was pressures INSIDE of the sealant. I have no real choice with night falling, and I had just suffered a VERY BAD gall-bladder attack so BIG or heavy work was out.

    I grabbed the sealant and squeezed and it stopped leaking.

    So..as a temporary measure I have taken a rope and wrapped the pipe for the rain-water tank tap, as if it were a very tight spool of plastic rope. It is not leaking anymore, but I KNOW this is not a real solution. I need to find out what kind of sealant to REALLY USE, and how to do it, when I fix this thing FOR REAL.

    I would love serious input from the experienced. I know that I have GOT to get this project/repair on the road before it is wet out all the time, or there will be a lot of limits on what kind of repairs can be done.

    CHEERS

    By the way, I am disabled, so there are some limits on what I can do (lifting and such) these days, but I am decent with my tools, so I am not afraid to try something new.


    .


    \along the pip the *UP* from underneath the sealant

  4. #19
    Join Date
    Feb 2008
    Location
    Deloraine Tasmania
    Age
    59
    Posts
    0

    Default

    Wish i had some advice for you Ken but i went with a new poly tank. cost me $1k - no more problems.

Similar Threads

  1. Rainwater tank and plumbing DYI?
    By Ashes in forum PLUMBING
    Replies: 14
    Last Post: 26th March 2008, 09:32 PM
  2. Rainwater tank and little stones
    By cart in forum LANDSCAPING, GARDENING, OUTDOORS
    Replies: 4
    Last Post: 7th December 2007, 09:40 PM
  3. Rainwater Tank With a Pump?
    By Metal Head in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 8
    Last Post: 20th September 2006, 11:46 AM
  4. leaking rainwater tank
    By macklin in forum NOTHING AT ALL TO DO WITH RENOVATION
    Replies: 9
    Last Post: 21st August 2006, 10:39 AM
  5. advice re rainwater tank
    By macklin in forum NOTHING AT ALL TO DO WITH RENOVATION
    Replies: 10
    Last Post: 17th April 2005, 11:34 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •