Results 1 to 3 of 3
  1. #1
    Join Date
    Apr 2009
    Location
    Helensville Auckland NZ
    Posts
    1

    Default Thicknesser Adjustment

    Hi Guys,
    New one on the block and I state my home is in Auckland NZ, but I'm messing about on a PC in Buenos Aires and cant sleep. Its 2-39am on Wed morning and the body clock wont reset, so I may as well do something useful.

    But that’s not what I hope one of you may be able to help with.
    I recently bought a secondhand 15" thicknesser, its built like a brick out house and goes really well. However, I am sure, though I haven't measured it, (but will when I get home) that the planer head is not parallel to the bed. I'm getting a finished product narrower one side than the other. I have reset the blades with care and confidant that is not the problem. Is there a way of adjusting the upper section to correct this? I mean apart from the raising and lowering for normal hight adjustment?
    Thanks in anticipation Robert. (Not quite sleepless in Seattle)

  2. #2
    Join Date
    Sep 2006
    Location
    Avoca Victoria
    Age
    81
    Posts
    7,790

    Default

    G'day & Welcome.
    I know the feeling........sleeping in a strange place.......different time zone etc.
    After you get a few G'day's back I reckon you should post into the Thicknesser forum with your question and you'll get some specific answers there.
    If you need a hand to do this, just give me a yell.

  3. #3
    Join Date
    Mar 2007
    Location
    Munruben, Qld
    Age
    84
    Posts
    0

    Default

    Hi Robert and welcome to the forum. As Watson suggested, start a thread and you will get heaps of advice.
    Reality is no background music.
    Cheers John

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •