Results 1 to 11 of 11
  1. #1
    Join Date
    Mar 2009
    Location
    Hydeaway Bay
    Age
    67
    Posts
    19

    Default Sanding slabs without a chiropractor

    Hi

    I just started woodworking as a hobby, the old man was a chippie so some of it is in my blood. I'm trying to make tables and chairs out of slabs. Sold a few so something must be working.... I just demolished a Hitachi 100mm belt sander and blew my budget at the chiropractor after surfacing some 1 metre wide slabs for some table tops. All the drum sander outfits are too expensive for me (remember that chiropractor) and be stuffed I can man-handle a 600mm wide 50mm thick, 4 metre long lump of timber thru a machine on my pat-malone. Has anyone tried using a drum floor sander on slabs? I thought I could work on the ground and make up a starting block to start the sander. Help! Am I mad trying this or is it back to the chiro?

    Cheers
    Paul
    Whitsundays

  2. #2
    Join Date
    Feb 2004
    Location
    kuranda north qld
    Posts
    0

    Smile

    a lot of guys use a woodwiz , would be interested in seeing how a floor sander went , couldnt be as hard as a belt sander , there is a surcare sander that is hand held and made for slabs too , better if you can lift on too a few saw horses. cheers bob

  3. #3
    Join Date
    May 2003
    Location
    Kuranda, paradise, North Qld
    Age
    63
    Posts
    2,026

    Default

    I used a floor sander for my dining table. I laid it on the ground and set up some timber either end the same thickness so I could run the sander off the ends. It worked well, certainly a hell of a lot quicker than using a belt sander. Apparently those surcare sanders have had some issues, I'm fairly sure I read a thread where someone bought one and it self destructed on top of a very expensive job, manufacturer didn't want to know about it.

    Mick
    "If you need a machine today and don't buy it,

    tomorrow you will have paid for it and not have it."

    - Henry Ford 1938

  4. #4
    Join Date
    Mar 2009
    Location
    Hydeaway Bay
    Age
    67
    Posts
    19

    Default

    Thanks Mick,
    Is surecare a brand... I am looking a buying a 2nd hand 10 inch one out of Adelaide (approx $1300), but ain't got any details yet

    Cheers
    Paul

  5. #5
    Join Date
    Mar 2009
    Location
    Hydeaway Bay
    Age
    67
    Posts
    19

    Default

    Thanks Bob,

    I looked closely at the wood wiz... impressive, but I really need to have some paying work and some floor space to justify that expense.

  6. #6
    Join Date
    Dec 2004
    Location
    Toowoomba Q 4350
    Posts
    3,491

    Default

    I have friends in the wood furniture and antique restoration business who will use a floor sander on slabs without looking back. JourneyManMick's suggestion is a great idea too.

    cheers
    Wendy

  7. #7
    Join Date
    Nov 2007
    Location
    Dundowran Beach
    Age
    77
    Posts
    0

    Thumbs up

    G'day Paul and welcome to the fountain of knowledge.

    See. You are in the right corner of cyberspace with great advice already given.

  8. #8
    Join Date
    May 2003
    Location
    Kuranda, paradise, North Qld
    Age
    63
    Posts
    2,026

    Default

    Quote Originally Posted by Paul Willcocks View Post
    Thanks Mick,
    Is surecare a brand... I am looking a buying a 2nd hand 10 inch one out of Adelaide (approx $1300), but ain't got any details yet

    Cheers
    Paul
    Surcare is a brand of sander, made specifically for finishing large surfaces. I believe they make/made two or more models. They have a large induction motor (2hp+?) driving 3 or 4 150mm discs. A bit like a super-duper ganged random orbital sander. They look really good in the pictures I've seen of them but I've heard some not so good stories about lack of customer service and warranty issues. Floor sanders are readily available 2nd hand and very robust machines. If you're going to get one, try to find one that is a belt sander rather than a drum. The belt sanders have a clutch to disengage them whilst the drum sanders need to be tipped back on their wheels to disengage them from the work surface. The belt sander also has a large flat contact patch as opposed to the smaller convex contact patch of a drum.

    Mick
    "If you need a machine today and don't buy it,

    tomorrow you will have paid for it and not have it."

    - Henry Ford 1938

  9. #9
    Join Date
    Mar 2009
    Location
    Hydeaway Bay
    Age
    67
    Posts
    19

    Default

    Thanks again Mick,
    This machine I am looking at is a Bono ... apparently they are German made so that's gotta be a +. I like the idea of a wider machine as it can help flatten the surface better. However cupping is one issue I need to be aware of, (not that all my slabs are cupped). My budget is limited.. I found (and now lost) a great site that had 2nd hand machines of all kinds.. mostly restored and buffers were from $2,200 upwards. Hopefully I can land this sucker in Nth Qld for around $1300.
    I will post the results....
    Cheers

  10. #10
    Join Date
    Mar 2009
    Location
    Hydeaway Bay
    Age
    67
    Posts
    19

    Default

    Thanks Artme.

    After a few years in the dark, my lights are now on!!!! This is a great site

    Cheers

  11. #11
    Join Date
    Mar 2009
    Location
    Hydeaway Bay
    Age
    67
    Posts
    19

    Default

    Hi there RR,

    Glad to hear what you said, I've just gotta give the chiropractor approach the flick!! I intend to go-ahead with this embelishment to my tool shed!!!
    Cheers
    Paul

Similar Threads

  1. Sanding and finishing timber slabs
    By BDL in forum FINISHING
    Replies: 3
    Last Post: 27th March 2009, 08:24 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •