Page 1 of 2 12 LastLast
Results 1 to 15 of 18
  1. #1
    Join Date
    Nov 2008
    Location
    Victoria Australia
    Posts
    5,897

    Arrow Feedback on MODWOOD decking??

    Hi

    Has anyone here used Modwood decking? Besides the appearance factor (which will be subjective), any feedback on durability, moisture/termite resistance, cost?

    Am wondering if it's worthwhile going Modwood for the reason that it may last longer and require less maintenance??

    Also, how much $$ and any good place in Melbourne to get them?

    Appreciate views on your experience with Modwood.


    Read the full thread at RenovateForum.com...

  2. #2
    Join Date
    Jan 2009
    Location
    Melbourne
    Posts
    3

    Default

    I used it and sure wish I hadn't. It is awful stuff. It splits, cracks, warps, and shrinks but worse of all - it grows algae faster than a petri dish.
    The manufacturer recommends just sweeping it but I can tell you that, in my case, that did nothing. I tried detergents and other chemicals (like bleach) with a firm brush but in the end, I had to bring out the Karcher. The manufacturer advises against pressure washing, but I had no option as my deck was so slippery with green algae all over it. What pressure washing seems to do is to get rid of the algae temporarily but makes the surface rougher so it is more likely to grow more algae the next time. And faster. I am now considering painting the infernal stuff. I do NOT recommend this product.

  3. #3
    Join Date
    Nov 2005
    Location
    Darkest NSW
    Posts
    93

    Default

    After losing our house in the bushfires of Jan 2020, we made a point of avoiding any external timer when rebuilding. Looked at several products like Modwood for decking, but all of them seem to have issues. I'm not sure a lot of them are suited to the high UV levels here in Oz....

    In the end we went with galvanised metal frame, and Hardiedeck planking - boards are fibre cement about 18mm thick and just clip together for fast installation, no screwing through boards required.

    Home | HardieDeck™ system

    They don't move, don't crack, don't warp, and don't burn. You can either seal them with a clear sealer to give an industrial/cement kind of finish, or paint any colour you like with decking paint. When paint gets dinged up after a few years, just give it a fresh coat of decking paint. Very happy with the product

  4. #4
    Join Date
    Jan 2009
    Location
    Melbourne
    Posts
    3

    Default

    Oh man! That must have been so heartbreaking. I can't imagine. We were evacuated during the Ash Wednesday fires but escaped unscathed. The hardiplank solution sounds like a good one. My neighbour went for an aluminium product which also clipped together. It was watertight and gave him a dry storage area underneath. It does get very hot to walk on in bare feet in summer though. Still, wish I had done the same.

  5. #5
    Join Date
    Nov 2005
    Location
    Darkest NSW
    Posts
    93

    Default

    I don't recommend it. The only thing that survived was my workshop, being only about 10m from the house but upwind of the 80km/h winds fanning the flames from the house.

    One side effect that people don't talk about - I have completely lost any desire to own "stuff", of any description. Haven't replaced much of what was lost in the fire, and I actually find the remaining belongings and tools I still have more of a burden than a pleasure. I'm currently working my way through workshop contents and selling a lot of it off. As a consumer, I'm ruined !

  6. #6
    Join Date
    Nov 2005
    Location
    Darkest NSW
    Posts
    93

    Default

    I looked into several brands of composite decking boards, not just Modwood, before going with the Hardiedeck. All of them seem to have very mixed reviews, and certainly don't live up to the manufacturer's claims even in the short term.

  7. #7
    Join Date
    Jun 2005
    Location
    Helensburgh
    Posts
    608

    Default

    Quote Originally Posted by Farnarkler View Post
    I used it and sure wish I hadn't. It is awful stuff. It splits, cracks, warps, and shrinks but worse of all - it grows algae faster than a petri dish.
    The manufacturer recommends just sweeping it but I can tell you that, in my case, that did nothing. I tried detergents and other chemicals (like bleach) with a firm brush but in the end, I had to bring out the Karcher. The manufacturer advises against pressure washing, but I had no option as my deck was so slippery with green algae all over it. What pressure washing seems to do is to get rid of the algae temporarily but makes the surface rougher so it is more likely to grow more algae the next time. And faster. I am now considering painting the infernal stuff. I do NOT recommend this product.
    I had it for about 20 years and have heard all the stories about twisting and cracking but mine never did that at all. It did have some algae problems but not major ones and that may well be due to climate and shading etc. I think the installation is the most important thing, make sure the joist centres are as specified or even less, pre drill and countersink all screw holes and most important of all pay attention to how close you place screws at the end of each plank because if you do get too close they WILL split. On the plus side Modwood is super easy to install as it stays straight and does not warp or twist like most natural timbers do.
    CHRIS

  8. #8
    Join Date
    Jun 2010
    Location
    Bundaberg
    Age
    54
    Posts
    160

    Default

    We have it in throughout our work camp; it has survived quite well with no structural or algae issues. What I did notice however within seconds of walking on it is that the boards end up feeling a little slick underfoot. We have hundreds of people walking over them every day in Olivers or Blunnies so they cope with wear very well; but you can “feel” that the surface isn’t real wood by the tiny amount of slip you get with every step.
    Nothing succeeds like a budgie without a beak.

  9. #9
    Join Date
    Jul 2008
    Location
    geelong
    Posts
    72

    Default

    This is very old school stuff - my dad told me that when the fires came through you could hear the bangs from the asbestos cement siding houses as the heat got too much for them. The weatherboard houses didn't do that - they burned - or didn't. Have worked at a place that made transportables for fire regions - 2 layers of 13mm plasterboard behind the Colourbond cladding. They seemed to have forgotten about the floor - or the roof!

  10. #10
    Join Date
    Jul 2008
    Location
    geelong
    Posts
    72

    Default

    Not Shure of the branding - local shopping centre had something like that - sagged over 2 years.

  11. #11
    Join Date
    Apr 2019
    Location
    NSW
    Age
    38
    Posts
    309

    Default

    Theres alot of brands of composite out there now.

    Mod wood is basically the cheap bunnings brand of composites. Talking to a chippy who has used it, he theres good and bad

    Bad, its a fairly cheap product with a cheap finish. Ive heard people mention the early versions flaking after a few years

    Good, its cheap and the fact its bunnings means you can just walk in and grab a spare board as required... that bunnings warranty.



    Im looking at using either newtech wood, which comes from some distributor in qld. But can be bought from places like dahlsens.
    Wood-Look Decking Australia | Recycled Wood | NewTechWood

    Or evowood, which is aussie owned and has a showroom in Melbourne, they are looking to setup a distribution warehouse in sydney soon

    I much prefered the look and texture of those two. Millboard was another brand that looked nice and had self hiding screws but was pretty much the most expensive one, but seemed to be very good quality.

    Most suppliers will send you free samples

  12. #12
    Join Date
    Apr 2018
    Location
    Nsw
    Age
    64
    Posts
    558

    Default

    There are lots of brands with varying quality. I have seen it buckle and sag and in other brands stand up very well. It is very popular on floating marinas and jetties and handles the punishment very well but that is obviously one of the better brands.
    I personally don’t care for the look but it is a durable maintenance free product which makes it appealing. Some discolour quickly and there is not much you can do with itwhen it does

  13. #13
    Join Date
    Jun 2005
    Location
    Helensburgh
    Posts
    608

    Default

    I was one of the first customers that used Modwood years and years before Bunnings began to stock it and Modwood custom cut the boards so I had very little to do besides laying it. The reason we were forced to use it was after the 2000 bushfires in NSW Wollongong council refused to allow us natural timber decking during renovations and the only practical other alternative was compressed cement and tiling which was obscenely expensive and hard to obtain. About two years ago we did more renos and pulled all the Modwood decking out and it went to a friend who promptly re-laid most of it for another deck. To put the fire thing in perspective our backyard ends at the boundary of the National Park south of Sydney and those forum members who have visited our place can tell you how tall the trees are.
    CHRIS

  14. #14
    Join Date
    Nov 2003
    Location
    Sydney
    Age
    54
    Posts
    891

    Default

    I built a deck for my house, and one for my sister-in-law's back in 2011. I have not had any issues. Yes, I will recommend it.
    Visit my website at www.myFineWoodWork.com

  15. #15
    Join Date
    Oct 2015
    Location
    Ringwood, VIC
    Posts
    133

    Default

    I have a small deck near a pool, used trex.
    It's certainly not the cheapest but I'm pretty happy with it..
    Easy to clean, non slip. No sign of sagging, but if i recall joist spacing is only 400.(as specified).

Similar Threads

  1. modwood
    By smokey in forum DECKING
    Replies: 8
    Last Post: 23rd April 2023, 01:40 PM
  2. Feedback on decking project
    By nmilne in forum FLOORING, DECKING, STUMPS, etc.
    Replies: 6
    Last Post: 9th January 2006, 10:44 AM
  3. 9m x 9m deck ?Modwood ?Pine
    By JDub in forum DECKING
    Replies: 17
    Last Post: 20th June 2004, 07:04 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •