![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
Thread: Too Big Bearer Span
-
19th January 2009, 07:50 PM #1
Too Big Bearer Span
Hoping you can provide some guidance - not sure if I have been misled!!
Building a floor for a cubby house, total size 3.0m x 2.2m.
With bearer span being 3.0m and wanting to get away with post at either end only (no post in the middle), I consulted span tables which suggested I needed at least 150x50. All good to this point....
I then headed out to buy timber. I was talked out of 3m x 150x50 and was told instead to go 2 pieces of 3.0m x 90x45 treated pine and screw them together (to effectively create 90x90). These have been bolted to the cyprus posts.
The frame for the floor is now together and I am worried that I am getting too much flex. Am I pushing my luck with 3.0m span with this wood?? It will mostly only be 2 kids in the cubby (plus weight of cubby, of course), but I want to be sure it will be safe.
Comments, thoughts, advice please?
Thanks.
Read the full thread at RenovateForum.com...
Similar Threads
-
Bearer spans
By tcable in forum FLOORING, DECKING, STUMPS, etc.Replies: 3Last Post: 8th January 2008, 03:58 PM -
Bearer span advice - HELP!!
By n00bie in forum FLOORING, DECKING, STUMPS, etc.Replies: 2Last Post: 1st January 2008, 04:58 PM -
Bearers (single span / continuous span)
By chessp in forum FLOORING, DECKING, STUMPS, etc.Replies: 2Last Post: 28th December 2007, 07:17 PM -
Should bearer supports (posts or stirrups) be located at the end of the bearer?
By Williamstown in forum FLOORING, DECKING, STUMPS, etc.Replies: 2Last Post: 4th October 2007, 10:05 AM -
what size steel bearer to replace wooden bearer
By jasper in forum FLOORING, DECKING, STUMPS, etc.Replies: 5Last Post: 12th January 2006, 12:16 AM