![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
-
5th January 2009, 12:20 PM #1
3 Different Wall Finishes - Matching up
I have three different wall finishes in one room that I need to match up to be the same.
70% is a lightly textured concrete painted over. I chipped into the wall and there doesnt appear to be any plaster at all.
15% of the room is finished in smooth plaster which butts up against the textured wall.
The other 15% is bare brick that has been painted.
I need to match it all up. I guess the easiest way to do this is to go with the majority finish which is the textured walls.
Any ideas on how I could achieve this without too much hassle.
Read the full thread at RenovateForum.com...
Similar Threads
-
Matching new oak to old oak in repair.
By Capt. Zero in forum FINISHINGReplies: 3Last Post: 15th September 2007, 07:13 PM -
Matching Render
By jimc in forum RENDERINGReplies: 3Last Post: 31st March 2006, 05:10 PM -
Matching Stain to Old Wood
By bpolvo in forum FINISHINGReplies: 1Last Post: 24th March 2005, 09:22 PM