Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 7 of 7
  1. 15th September 2004, 09:34 PM #1
    Ralph Jones's Avatar
    Ralph Jones
    Ralph Jones is offline SENIOR MEMBER
    Join Date
    Apr 2004
    Location
    London, Ohio
    Age
    89
    Posts
    524
    Post Thanks / Like

    Default WOODWORKING QUIZ for 15 Sept 04

    Good Evening Friends,
    Using a hole saw is great and does a neat job but the only problem is that each time you have to knock out the donut you just drilled before you can continue, and could be time consuming.

    What would be a good solution to make this chore a little quicker?

    Respectfully,
    Ralph Jones Woodworking
    London, Ohio
    Reply With Quote Reply With Quote
  2. 15th September 2004, 10:34 PM #2
    journeyman Mick's Avatar
    journeyman Mick
    journeyman Mick is offline GOLD MEMBER
    Join Date
    May 2003
    Location
    Kuranda, paradise, North Qld
    Age
    63
    Posts
    2,026
    Post Thanks / Like

    Default

    a)use a holesaw arbor that has an ejector spring
    b)use one of the new quick attach/release arbors that aloow you to snap the blade off, remove the waste and plug it back together.

    Mick
    "If you need a machine today and don't buy it,

    tomorrow you will have paid for it and not have it."

    - Henry Ford 1938
    Reply With Quote Reply With Quote
  3. 16th September 2004, 09:14 AM #3
    Wood Borer's Avatar
    Wood Borer
    Wood Borer is offline SENIOR MEMBER
    Join Date
    Apr 2003
    Location
    Tolmie - Victoria
    Age
    69
    Posts
    1,058
    Post Thanks / Like

    Default

    Drill from both sides (if possible) so that the plug will be only partly inside the hole saw.
    - Wood Borer
    Reply With Quote Reply With Quote
  4. 16th September 2004, 10:54 AM #4
    echnidna's Avatar
    echnidna
    echnidna is offline SENIOR MEMBER
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    3,208
    Post Thanks / Like

    Default

    use a spade bit
    Regards, Bob Thomas

    www.wombatsawmill.com
    Reply With Quote Reply With Quote
  5. 16th September 2004, 11:16 AM #5
    bitingmidge's Avatar
    bitingmidge
    bitingmidge is offline Pretend my avatar moves!
    Join Date
    Nov 2003
    Location
    Australia and France
    Posts
    2,869
    Post Thanks / Like

    Default

    Just use one hole saw per hole.

    P
    Reply With Quote Reply With Quote
  6. 16th September 2004, 09:30 PM #6
    Ralph Jones's Avatar
    Ralph Jones
    Ralph Jones is offline SENIOR MEMBER
    Join Date
    Apr 2004
    Location
    London, Ohio
    Age
    89
    Posts
    524
    Post Thanks / Like

    Default WOODWORKING QUIZ ANSWER for 15 Sept 04

    Good Evening Friends,
    there were several answers given on this one and I like the one where you drill most way through and then go to the other side and finish leaving a part of the plug sticking out.

    They say a picture is worth a thousand words. So attached is todays answer.

    Respectfully,
    Ralph Jones Woodworking
    London, Ohio
    Reply With Quote Reply With Quote
  7. 16th September 2004, 10:32 PM #7
    Wood Borer's Avatar
    Wood Borer
    Wood Borer is offline SENIOR MEMBER
    Join Date
    Apr 2003
    Location
    Tolmie - Victoria
    Age
    69
    Posts
    1,058
    Post Thanks / Like

    Default

    What a good idea in the picture.
    - Wood Borer
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules