![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 5 of 5
Thread: Hey everyone
-
11th December 2008, 10:48 PM #1
New Member
- Join Date
- Dec 2008
- Location
- NSW
- Posts
- 6
Hey everyone
Gday, im basically interested in making old bunged up rifles look pretty again. Im a juniour at my rifle club and saw an old stock lying around and thought i could make it look pretty. I was kinda new to anything wood and found some ancient sand paper 150 grit and began sanding, i was so amazed at how smooth it was and i showed my dad and his mate the just laughed and said that i could do a better job then that. So i spent my pocket money and made my way up to 2000grit and created my first pretty stock. It was then used as a beginners clubs stock and im still disapointed how it has been treated for a week of my time sanding and polishing. So now im doing my own one. The club captain was nice enough to give me a rifle and thats why im on this site, searching for knowledge. Anyhow any help or any thing that you would like to share to help me would be most appreaciated.
Good Hunting!
-
11th December 2008, 11:02 PM #2
There's a lot of good reading at:
https://www.woodworkforums.com/forumdisplay.php?f=9
and have fun making that rifle something to be proud of.
soth
-
12th December 2008, 11:49 AM #3
Hi welcome. That sure is an unusual interest you have there but sounds great. Hope you find the kind of stuff you are looking for.
Reality is no background music.
Cheers John
-
12th December 2008, 01:25 PM #4
Hi Maplesrup...welcome to the forums
Won't be long before you start making stocks from scratch!!Cheers,
Ed
Do something that is stupid and fun today, then run like hell !!!
-
13th December 2008, 06:44 PM #5
New Member
- Join Date
- Dec 2008
- Location
- NSW
- Posts
- 6
Thats my next challenge. I have seriously been considering building my own rifle stock. I have just gotta get my dad into the idea,(i dont know how to use a router so i would probably need him) The hardest part is inletting, give me a few weeks in the holidays i may have my OWN stock