![Thanks](https://www.renovateforums.com.au/dbtech/thanks/images/thanks.png)
![Likes](https://www.renovateforums.com.au/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 1 of 1
Thread: Which drill for this job?
-
12th December 2008, 06:40 PM #1
Which drill for this job?
Hi. I am undertaking the next phase of my "finally-got-my-@rse-into-gear" reno's.
Stage 2: I need to take off a whole bunch of pickets from a metal frame (gate, fencing etc) so that I can FINALLY paint them. Eh, what's 9 years between friends
The gent at Bunnings reckons I need at least a 14 volt drill and be prepared to spend >$150. Whaddayreckon? Is he pulling my chain? Any other suggestions?
er, I take it I need to do some sanding before painting after this long. Timber is in good nick as it isn't exposed to a lot of weather (contrary to popular belief I am in Vic and we ARE in drought)
Cheers,
kelly
Read the full thread at RenovateForum.com...