Results 1 to 7 of 7
-
9th December 2008, 03:00 PM #1Novice
- Join Date
- Dec 2008
- Location
- NSW
- Posts
- 9
Looking for supplier of Queensland Maple Veneer
Hello all,
I am new here. I am not originally from Oz so I am struggling to find the right suppliers for stuff.
I want to buy a piece of Queensland Maple venner so I can restore an old Gramophone. I have made a good couple of phone calls to various suppliers like Briggs etc
They can only supply a plywood sheet with the veneer on it or veneer with iron on glue on it or they have a minimum order of $100 or they don't have this type of wood.
None of them seem to have the option of goind there and handselecting the veneer to match something existing.
Where is the right place to go and buy proper plain veneer to match existing old veneer?
Surely in this vast land has to be a specialised shop for this?
I am in Sydney by the way.
Kind regards
Bernt
-
9th December 2008, 04:24 PM #2
Hi berntd, I get my special veneers from Rivergum Timbers in Maroochydore QLD. Give Richard Coles a ring ,he maybe able to help you.
07 54411356. regards John.
-
9th December 2008, 07:13 PM #3Happy Feet
- Join Date
- Sep 2007
- Location
- Armadale
- Posts
- 887
salvage some from an old decco dressing table you can pick them up at most op shops for 50 bucks.
I've got one in storage about to send to the Op shop but I'm in melbourne
In this vast land they're arn't many people and long distances to be travelled, specialist timber is quite hard to source new.
-
10th December 2008, 02:07 PM #4Novice
- Join Date
- Dec 2008
- Location
- NSW
- Posts
- 9
Hello
Thhank youv ery much for the kind replies!
Astrid, I am not sure if I can do that because I will end up wantiong to restore the dresser as well )
Also, how would one get the veneer off in one piece?
I still cannot believe that there seems to be not one person in Sydney who knows where to buy veneer...
I will try another forum as well.
Regards
Bernt
-
10th December 2008, 03:04 PM #5
Peter Scott Young
37 Alexandra Rd, Ringwood, VIC 3135
p: (03) 98708733
Will do veneers by mail order, and is an absolute gentleman. Ask him for a catalog.Chris
========================================
Life isn't always fair
....................but it's better than the alternative.
-
10th December 2008, 10:46 PM #6Happy Feet
- Join Date
- Sep 2007
- Location
- Armadale
- Posts
- 887
you get the vaneer off by heating the edge with a warm iron and melting the olg glue, while it is warm slide a pallet knife under the edge and carefully work it loose.
How big is the gramophone, you shouldnt need that much.
-
10th December 2008, 10:58 PM #7anne-maria.
Tea Lady
(White with none)
Follow my little workshop/gallery on facebook. things of clay and wood.
Similar Threads
-
Staining Maple Burl Veneer
By VanMan in forum FINISHINGReplies: 7Last Post: 29th March 2005, 11:20 PM
Bookmarks