Results 1 to 1 of 1
Thread: Plumbing espresso machine
-
3rd December 2008, 09:20 PM #1
Plumbing espresso machine
G'day Guys, I have a commercial espresso machine I will be plumbing into my kitchen and was hoping to share with the dishwasher.
Basically the dishwasher has a shutoff valve and that's it. The espresso machine will have a 350 kpa PLV going in to a filter then the machine. Firstly I was wondering if it necessary to have another shutoff valve for the espresso machine or is it kosher for both to share that line with a Tee?
The second thing was the drain from the dishwasher. It's a standard domestic install for the dishwasher, with the drain going into the trap under the sink. The espresso machine obviously sits on the counter, if a Tee fitting was fitted to the dishwasher drain is there any possibility it have enough pressure to pump back up into the espresso drain? I was thinking of fitting a tee as close to the trap as possible.
Thanks for the help.
Pete
Read the full thread at RenovateForum.com...
Similar Threads
-
Plumbing
By ubeaut in forum PLUMBINGReplies: 0Last Post: 16th November 2008, 07:10 AM -
Plumbing help - what is this?
By jimbob888 in forum PLUMBINGReplies: 9Last Post: 7th May 2008, 04:55 PM -
Plumbing Connundrum
By hazypond in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 2Last Post: 5th December 2005, 10:38 PM -
2 plumbing ?
By dzcook in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 2Last Post: 31st August 2005, 07:29 PM
Bookmarks