Im heading down to do a maintenance job on a floor in a couple of weeks, but I am not sure what the existing finish is.

My guess is a two-pac poly. But, given that I am not going to get a look at it until the day I turn up is there anyway the client can ID the finish for me?

My problem is that he wants a solvent based poly coat, however if the original is a water based finish then it wont bind properly - am I right?

However if we go with a water based poly with a cross-linker additive then it doesnt matter if it is water based or solvent based poly?

Suggestions?

Cheers


Read the full thread at RenovateForum.com...