Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Anybody use this spray poly?
-
11th September 2004, 08:59 AM #1
Senior Member
- Join Date
- Jun 2003
- Location
- Western Sydney
- Posts
- 149
- Post Thanks / Like
Anybody use this spray poly?
Hi,
I am sussing out spray poly for blackwood kitchen cabinet doors & would appreciate any comments on this product (two pack Spraythane 2000 or acid lacquer). It is Oz manufactured by Campbell / Evic.
http://www.evic.com.au/products/2000/index.html
Regards,
Theva
-
12th September 2004, 09:22 PM #2
Senior Member
- Join Date
- Jun 2003
- Location
- Western Sydney
- Posts
- 149
- Post Thanks / Like
So, I guess not.
Regards,
Theva
-
12th September 2004, 09:57 PM #3
Supermod
- Join Date
- Jul 1999
- Location
- Brisbane, Qld.
- Age
- 48
- Posts
- 579
- Post Thanks / Like
nope...
You have to be a bit careful using 2pk poly-u on timber. it dosn't have much give and we all know timber likes a bit of give, especially on timber doors and their floating panels.
A/C Lacquer is IMO by far the better option. And I would advise Mirtone 830 (or whatever the equivilant is now)
-
13th September 2004, 08:08 AM #4
Senior Member
- Join Date
- Jun 2003
- Location
- Western Sydney
- Posts
- 149
- Post Thanks / Like
Tanks maestro Shane,
My other choice was A/C lacquer. What is the difference between NC, pre cat & A/C two packs?
Regards,
Theva
-
13th September 2004, 08:13 AM #5
Supermod
- Join Date
- Jul 1999
- Location
- Brisbane, Qld.
- Age
- 48
- Posts
- 579
- Post Thanks / Like
NC is pre cat. And from what I understand (or remember) it cures from solvent evaporation.
and A/C needs the acid to trigger the curing process.
Somthing like that anyway
Reply With Quote
Bookmarks