Results 1 to 9 of 9
  1. #1
    Join Date
    Apr 2004
    Location
    Warwick, Qld
    Posts
    52

    Smile Carport workshop

    I am planning to construct a work area in my carport. The floor I'm planning is to be concrete pavers on 50mm bedding sand. I'm thinking of spraying the soil with Roundup, then a layer of builder's plastic or possibly weed mat then the sand. I just purchased, at auction, 2 lockable steel cabinets to house most of my tools.
    Being a tyro at this is not too easy for a 76yr old pensioner. However,I'm willing to have a go. Any suggestions re the setting up would be appreciated. Just finished renovating a studio for my wife so I know about working with second hand things.

    Cheers

  2. #2
    Join Date
    Sep 2007
    Location
    Bottom of the leg
    Age
    82
    Posts
    366

    Default

    I think spraying your soil with round up would be a waste as it only works on the green parts of plants.

    If you put builders plastic down surely that will stop any moisture from wind driven rain soaking away. ( im assuming its open and not got 4 walls and a door ).

    if you lay your pavers and then spray any growth i would imagine you would soon be weed free.

    Remember im not in the building game.


    Cheers Fred
    Cheers Fred



    The difference between light and hard is that you can sleep with the light on.
    http://www.redbubble.com/people/fredsmi ... t_creative"

    Updated 26 April 2010
    http://sites.google.com/site/pomfred/

  3. #3
    Join Date
    Oct 2003
    Location
    Sydney,Australia
    Posts
    42

    Default

    Just being a pessimist, but make sure the cabinets of tools are out of sight and preferrably locked up inside somewhere. Anything that looks 'interesting' - i.e. can be flogged at the nearest pawn shop or weekend market - and not too well guarded tends to disappear.

    Even in 'nice' towns - you have no control over the blow-ins who may just be driving past & looking for a quick score. Hand tools, both 'Armstrong' and power, are favourites with thieves.

    A bench that is well bolted to something solid like the fence or brick piers is pretty safe, but a few yobs with a ute can make even table saws disappear quickly. Unfortunately about every 6 months or so we read on here about another member having gear stolen - tools or several hundred dollars of timber turned into firewood

  4. #4
    Join Date
    Apr 2004
    Location
    Warwick, Qld
    Posts
    52

    Default

    OK Fred, where in hell is "bottom of the leg"?
    Thanks for your comments

  5. #5
    Join Date
    Nov 2003
    Location
    Beachport, South Oz, the best little town on the planet.
    Age
    73
    Posts
    776

    Default

    Quote Originally Posted by FrankS View Post
    OK Fred, where in hell is "bottom of the leg"?
    Maybe Footscray?

  6. #6
    Join Date
    Apr 2004
    Location
    Warwick, Qld
    Posts
    52

    Default

    Yea! I like that..a bit like the Boot = Italy.
    The area of my carport I'm thinking of using has 2 walls and would be the rear part of the actual "carport". Thanks for your thoughts.

  7. #7
    Join Date
    May 2007
    Location
    Gold Coast
    Age
    71
    Posts
    456

    Default

    Hi Frank,
    You need to prepare the ground first by removing any grass/vegetation before laying the base. If you lay the base on bare ground any subsequent growth that appears will most likely be growing only in the jointing sand.

    I don't think the plastic would do much except make it easier for the sand base to move around. Most instructions for paving I've read say to use 30-40 mm of bedding sand on an even base. If the base isn't even or you need to build up the level then you need to lay down and compact a layer of roadbase. Road base is pretty easy to work with.

    Typical instructions can be found here PGH Paving Guide

    For small areas you can compact with a lump of wood and a 4lb hammer or rubber mallet, for larger areas a compacter is easier. I've just done some paving and found the Bunnings Hire shop to be the cheapest place to hire a compacter. $45 for 1/2 day or $65 for 24 hrs and you can borrow a courtesy trailer to shift it.

  8. #8
    Join Date
    Sep 2007
    Location
    Bottom of the leg
    Age
    82
    Posts
    366

    Default

    Quote Originally Posted by FrankS View Post
    OK Fred, where in hell is "bottom of the leg"?
    Thanks for your comments

    Look at the map of SA.

    Cheers Fred
    Cheers Fred



    The difference between light and hard is that you can sleep with the light on.
    http://www.redbubble.com/people/fredsmi ... t_creative"

    Updated 26 April 2010
    http://sites.google.com/site/pomfred/

  9. #9
    Join Date
    Aug 2005
    Location
    Queensland
    Posts
    613

    Default

    If I could add a suggestion[s]

    - ensure the cabinets are secured to one of the walls

    - be aware that tools inside a metal cabinet which is partially exposed to the elements could end up with moisture/rust problems - WD 40 is not a long term solution DAMHIK.

    - pavers should be as large as possible [300 - 400mm would be ideal rather than the brick type] and I would tend to locate them on crusher dust [screeded with a slight fall and firmed] rather than bedding sand - contrary to pamphlets, I know but bedding sand tends to be a haven for ants which end up moving the sand everywhere. Some pamphlets also recommend up to 5mm gaps between pavers and this is filled with a paving sand or some even use a sand cement mix [which stains beautifully unless you are very careful] - I have found that in a situation similar to yours that basically fitting the pavers as close as possible was more successful.

    Just some thoughts, regards,
    Bob

Similar Threads

  1. cheapo carport
    By johnwelch in forum BRICKWORK, CONCRETING, PAVING, RENDERING, etc
    Replies: 1
    Last Post: 10th March 2008, 08:47 PM
  2. Screening Around Carport
    By davidw_01 in forum LANDSCAPING, GARDENING, OUTDOORS
    Replies: 5
    Last Post: 1st February 2008, 09:40 AM
  3. Carport
    By Benno in forum THE GARDEN SHED
    Replies: 5
    Last Post: 30th August 2005, 09:33 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •